Skip to main content

Influence of 3D printing on mechanical manufacturing and automation

Influence of 3D printing on mechanical manufacturing and automation

3D printing technology is widely used because of its flexibility and convenience. Printing technology involves different molding processes and material classification.

There is no uniform standard now. According to the volume of the equipment, it can be divided into desktop, medium and large 3D printers; It can be divided into: aerospace, military, industrial, civil 3D printers, etc. 3D printing propsis a comprehensive technology combining mechanical engineering technology, computer software technology, 3D model technology, data processing technology and other disciplines. To a certain extent, it meets the needs of the development of mechanical manufacturing, and brings ultra-fast molding speed, unparalleled printing speed, high material utilization rate and short production cycle in industrial production, greatly improving the degree of automation and digitalization.

At present, XYZPrinting partpro150_ XP, mechanical manufacturing and automation are mainly based on computers, combined with mechanical equipment and automation, and through a series of manufacturing technologies, such as computer-aided design and manufacturing, flexible manufacturing system, and then constitute a computer integrated manufacturing system. Its applications mainly include CNC machines and machining centers.

The impact of printing on mechanical manufacturing and automation mainly has two aspects: positive and negative.

It has two impacts on the development of mechanical manufacturing and automation. 3D printing medical uses a variety of materials, but the material itself has limitations and hazards. Especially, the more difficult it is to degrade materials, which directly threatens human health and safety. The promotion of 3D printing and laser scanning technology may also lead to a large number of imitation products, which will bring some challenges to the development of the design industry and commodity costs, such as furniture products, tools, and even intellectual property issues.

In the information age, printing in chip manufacturing still has some limitations. Because the relevant parts of different materials are difficult, it is necessary to improve and improve between energy consumption, high cost and low efficiency. 3D Printing jewellery is an important embodiment and component of the development of mechanical manufacturing automation.

Compared with traditional printers, the liquid or powder emitted by 3D printers are different printing materials, such as light curing, rapid direct manufacturing and molding, layer-by-layer control computer superposition, and finally the physical object can be obtained. The workflow of 3D printer is to create a project, use CAD software, copy the model to 3 printers, print by setting various adjustable parameters, and specifically compose control elements, mechanical elements, print heads, consumables and media If all processes and parts are automated, 3D printing technology and mechanical manufacturing automation will be more closely linked.

Products that 3-di.com can process include: 3d printing applianc, 3d printing sand table

For more information about us, please contact us directly.

 Copyright notice: This article comes from https://3-di.com/


Comments

Post a Comment

Popular posts from this blog

Machining and welding process notes for TC4 titanium alloy parts

Common welding methods for titanium and titanium alloys are as follows: Argon arc welding, submerged arc welding, vacuum electron beam welding, etc. Tungsten argon arc welding is used for thicknesses of 3 mm or less, and argon arc welding is done for 3 mm or more. The purity of argon is over 99.99%, and the content of air and water vapor in argon is strictly controlled. Currently, for TC4 titanium alloys, argon arc welding, plasma arc welding are often used for welding, but both methods need to be filled with welding material. Limitations on shield gas, purity and effectiveness increase the oxygen content of the joint, reduce its strength and increase its post-weld deformation. Electron beam welding and laser beam welding are used. The following is a description of precision welding and precautions for TC4 titanium alloy. 1. Weld hole problem Table of Contents 1. Weld hole problem 2, internal quality of welded part 3. Weld depth and its variation 4, j...
Post a Comment
Read more

Introduction to the correct choice of lubricating oil in summer

In the summer heat, not only the human body will have various adverse reactions, but also the car. Today, I will share with you one of the things you need to pay attention to in summer-lubricants. The role of lubricating oil The heat generated by the friction between the various moving bearing surfaces of the engine is second only to the heat when the engine cylinder is burned, and the lubricating oil takes the heat away by pressure lubrication, thus ensuring the normal operation of the friction surface. The heated lubricating oil returns to the oil pan through the oil passage for cooling. In terms of the structure of the engine, the oil pan is located under the engine*, and it is exposed to the air. It is generally made of materials with good thermal conductivity, and the lubricating oil is air-cooled through it. The cooled lubricating oil is sent to the lubricated surface again. The viscosity of the lubricating oil is very important for protecting the en...
Post a Comment
Read more
The production process of KOVAR parts processing has a great relationship with the process, including the process environment elements and the optimization configuration elements of the process route. The process route process needs to be formulated by an experienced person. The following is a brief explanation of the process process. The formulation of the process route process: First, the geometric structure of the parts, the core parts of the accuracy index, the accuracy requirements, material characteristics, heat treatment requirements and performance requirements, etc. should be carefully analyzed, and then the blanks of the parts should be reasonably selected, the cnc machining china equipment should be used reasonably, and reasonable measures should be taken. Many process links such as stress process measures are reasonably configured. In the production organization process, the process is strictly implemented. During the process, strict inspection is performed. For general p...
Post a Comment
Read more