Skip to main content

Selection of Surface Machining Methods for Inner Hole of CNC Lathe Machined Parts

Selection of Surface Machining Methods for Inner Hole of CNC Lathe Machined Parts

 

There are many methods for surface processing of inner holes of CNC lathes. Commonly used are drilling, reaming, reaming, boring, turning, grinding, drawing, grinding, honing, and rolling holes.

 

Applicable method for inner hole machining of CNC lathe machined parts:

 

1. Drilling:

Drilling holes in the solid part of the workpiece with a drill is called drilling. CNC cutting is a process method for parts processing on CNC machine tools. The process regulations of CNC machine tool processing and traditional machine tool processing are generally the same, but significant changes have also taken place. A machining method that uses digital information to control the displacement of parts and tools. It is an effective way to solve the problems of variable parts, small batches, complex shapes, and high precision, and to achieve high-efficiency and automated processing. The drilling is rough swiss machining, and the dimensional tolerance level that can be reached is IT13~IT11, and the surface roughness value is Ra50~12.5μm. Is it due to the long length of the twist drill, the small core diameter and poor rigidity, as well as the influence of the chisel edge.

 

2. Reaming:

Reaming is a finishing method for holes on the basis of semi-finishing (reaming or semi-finishing boring). In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and letters, and the processing required by the processing technology. It generally refers to the process of processing parts on CNC machine tools. In order to improve the degree of production automation, shorten the programming time and reduce the cost of CNC machining, a series of advanced CNC drilling technologies have been developed and used in the aerospace industry. The size tolerance of the reaming hole can reach IT9~IT6, and the surface roughness value can be Ra3.2~0.2μm. There are two ways of reaming: organic hinge and hand hinge. Reaming on a machine tool is called a machine hinge, and a manual reaming is called a hand hinge.

 

3. Car hole:

The turning hole on the lathe is the rotation of the workpiece and the movement of the turning tool. The aperture size can be controlled by the cutting depth of the turning tool and the number of passes, which makes the operation more convenient. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and letters, and the processing required by the processing technology. It generally refers to the process of processing parts on CNC machine tools. In order to improve the degree of production automation, shorten the programming time and reduce the cost of CNC mill-turn, a series of advanced CNC machining technologies have been developed and used in the aerospace industry. Lathe turning holes are mostly used to process the holes of disc sleeves and small brackets.

 

4. Boring:

Boring is the further processing of holes that have been drilled, cast or forged with a boring tool. It can be carried out on a lathe, boring machine or milling machine. Boring is one of the commonly used hole processing methods, which can be divided into rough boring, semi-fine boring and fine boring. The dimensional tolerance grade of rough boring is IT13~IT12, and the surface roughness value is Ra12.5~6.3μm; the dimensional tolerance grade of semi-finish boring is IT10~IT9, and the surface roughness value is Ra6.3~3.2μm; The dimensional tolerance grade is IT8~IT7, and the surface roughness value is Ra1.6~0.8μm. here is about our partner.

 

5. Reaming:

Reaming is to use a reaming drill to further process the drilled hole to enlarge the aperture and improve the accuracy (precision) and reduce the surface roughness value. The dimensional tolerance level that can be achieved by reaming is IT11~IT10, and the surface roughness value is Ra12.5~6.3μm. It belongs to the semi-finishing method of hole processing. It is often used as pre-processing before reaming, and can also be used as precision (precision). The final machining of holes that are not high.

be-cu.com Services include: wire-cutting, metal-casting, metal-stamping, investment-casting, laser-cutting carbon-fiber, cnc-milling carbon-fiber, cnc-drilling carbon-fiber, cnc-turning carbon-fiber, metal-forging, powder-metallurgy, design, permanent-mold-casting, low-pressure-casting, vacuum-casting, centrifugal-casting, sand-casting, lost-foam-casting.

 Copyright notice: This article comes fromhttps://be-cu.com/micromachining/

 

 


Comments

Post a Comment

Popular posts from this blog

What are the characteristics of the CNC turning process?

What are the characteristics of the CNC turning process? Turning is a method of cutting the workpiece on the lathe by rotating the workpiece relative to the tool. Turning is the most basic and common cutting processing method. Most workpieces with revolving surfaces can be processed by turning methods, such as inner and outer cylindrical surfaces, inner and outer conical surfaces, end surfaces, grooves, threads, and rotary forming surfaces. Common lathes can be divided into horizontal lathes, floor lathes, vertical lathes, turret lathes and profiling lathes, and most of them are horizontal lathes.
1 comment
Read more

The Influence of CNC Turning and Milling Machining on Turning Efficiency

The cutting efficiency of CNC lathes will be affected by human factors, environmental factors and the machine tool itself. Let's talk about the influence of cutting amount and cutting tools on CNC lathe processing among many factors.   Reasonable cutting amount can improve the efficiency of CNC lathe. When the   laser  cutting  speed is increased by 10 times and the feed rate is increased by 20 times, far beyond the traditional cutting forbidden zone, the cutting mechanism has undergone a fundamental change.   The result of CNC turning  and milling combined processing is: the metal removal rate per unit power is increased by 30% to 40%, the cutting force is reduced by 30%, the cutting life of the tool is increased by 70%, and the cutting left on the workpiece is greatly reduced. Heat, cutting vibration almost disappeared; cutting processing has taken an essential leap. According to the current situation of CNC lathes, increase the feed per tooth, improve pr...
1 comment
Read more

Alternate vehicles, transportation equipment and field work machine oil in all seasons adapt to changes in temperature

  Foreign oil companies adopt tracking services for key users. Whenever the oil change period is approaching and users need to buy oil, they will test the oil for free in advance, issue an inspection report, and actively provide key users with a scientific basis for oil change. This kind of thoughtful service not only shortens the distance with users, but also improves the credibility of the brand. The alternation of the four seasons requires the oil used in vehicles, transportation equipment and field work tools to adapt to changes in temperature, especially in the north. Lubricants of different viscosity grades are usually replaced at the end of autumn and spring, thus forming a peak season for lubricating oil sales. Foreign oil companies attach great importance to the promotional activities in these two seasons. In the autumn, they launched low pour point, low viscosity grades of multi-grade antifreeze and antifreeze, and accompanied the promotion a...
Post a Comment
Read more