Skip to main content

Approximate dry machining benefits from minimal lubrication

With the continuous development and technological progress in the field of metal processing, the concept of green processing has become more and more popular. The traditional lubrication cooling method using cutting fluid is gradually replaced by dry cutting technology. Because dry cutting also has defects for machining, it makes the machining quality drop and the cutting tool wears faster. Micro-lubrication technology emerged at the historic moment. The application of micro-lubrication technology improves the quality of machined parts and reduces tool wear. To a large extent, it solves the impact of dry cutting and will gradually become a technology that is compatible with dry cutting. The application of micro-lubrication technology will gradually replace the cooling and lubricating effects of cutting fluid.

…
The application of oil mist micro-lubrication technology can solve the lack of dry cutting without lubrication, improve the surface quality of processed workpieces under dry cutting conditions, reduce the wear of cutting tools, and extend the service life.

…
During metal processing, cooling and lubrication is an important aspect related to product accuracy and quality. While the same product quality can be achieved, the overall processing cost should be reduced as much as possible, and the production efficiency should be improved. For the processing of small-sized parts, the parts themselves have good heat dissipation, and the spraying method using a large amount of cutting fluid is undoubtedly a waste of energy. The application of micro-lubrication technology is to provide the amount of lubrication as needed, avoiding the waste of over-lubrication, and achieving controllable and reduced costs.

…
However, with the increase in environmental protection requirements of industrial enterprises, the impact of the lubrication method of pouring cutting oil on the environment and human health has been paid more and more attention. At the same time, the cost of using cutting oil and the treatment of waste liquid are not small for enterprises. Expenditures also virtually affect the competitiveness of enterprises.

…
Doppelt adapts to the trend of green development in the machinery industry, and continuously introduces micro-lubrication products that meet the needs of various machining processes. The application of micro-lubrication technology in metal processing will bring more benefits to enterprises. We are willing to welcome the green with you. Revolution of manufacturing.

Link to this article：Approximate dry machining benefits from minimal lubrication

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank

Comments

Post a Comment

Popular posts from this blog

Drive the preferential presetting of the spring frame of the vehicle

The secondary spring system of the original electric locomotive consists of 4 sets of the same ordinary cylindrical compression springs. Its parameters are: spring material diameter d=48mm, maximum working circle diameter D=230mm, effective working circle number n=6.6, free height H0= 528mm, working height H=431mm. The characteristic curve of the spring is approximately straight, with stable stiffness and simple structure. However, the spring stiffness is mainly along the axial direction, and its transverse shear and bending stiffness is very poor, and its anti-resonance ability is poor. After the train speeds up, its snake-like movement and shaking phenomenon intensify. Therefore, it is necessary to improve the spring system of electric locomotives. Improvement of the spring system. The improved spring parameters and characteristics take into account the special position of the secondary spring (between the bogie and the car body) and specific functions (s...
Post a Comment
Read more

Semikron SKM200GB176D

# SKM200GB176D Semikron SKM200GB176D New Semikron Made SKM200GB176D IGBT ModuleTrans IGBT Module N-CH 1700V 260A 7-Pin Case D-56, SKM200GB176D pictures, SKM200GB176D price, #SKM200GB176D supplier ------------------------------------------------------------------- Email: [email protected] https://www.slw-ele.com/skm200gb176d.html ------------------------------------------------------------------- Part Status Active Technology Trench Channel Type N Configuration Dual Typical Collector Emitter Saturation Voltage (V) 2 Maxim um Collector-Emitter Voltage (V) 1700 Maximum Gate Emitter Voltage (V) ±20 Maximum Continuous Collector Current (A) 260 Minimum Operating Temperature (°C) -40 Maximum Operating Temperature (°C) 150 Automotive No Pin Count 7 Supplier Package Case D-56 Mounting Screw Package Height 30 Package Length 106.4 Package Width 61.4 PCB changed 7 Semikron Made SKM200GB176D Maximum ratings and characteristics  .Absolute maximum ratings (...
Post a Comment
Read more

Sharp LM32004

# LM32004 Sharp LM32004 New LM32004 Sharp 5.7 inch LCM 320×240 Monochrome CCFL Parallel Data, LM32004 pictures, LM32004 price, #LM32004 supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/lm32004.html ------------------------------------------------------------------- Brand: Sharp Panel Model: LM32004 Panel Size: 5.7inch Panel Type: STN- LCD , LCM Resolution: 320×240, Q VGA , 70 PPI Pixel Format: Rectangle Display Area: 115.17(W)×86.37(H) mm Display Mode: STN, Blue mode (Negative) Display Colors Monochrome  ApplicationIndustrial Signal InterfaceParallel Data Lamp Type1 pcs CCFL   LM32004 inverter, LM32004 power supply, LM32004 electronic board, LM32004 VGA b...
Post a Comment
Read more