Skip to main content

Hot summer car maintenance strategy

Nature: Fire
In addition to the hot weather, the aging of vehicle internal parts is also an important cause of spontaneous combustion of vehicles. Therefore, vehicle owners should be diligent in daily inspection and maintenance of vehicles.
Engine gasoline filter failure, wiring failure, power line aging, or long-distance overloading of the car causes the engine components to keep running and the temperature rises, which may cause the car to spontaneously ignite.
Fire extinguisher essential
The fire extinguisher is a necessary device for the car. However, many car owners do not understand the correct use of fire extinguishers, or never check whether the fire extinguishers are working properly, so that in the event of an emergency, they cannot carry out self-rescue. Therefore, vehicle owners should learn the correct use of fire extinguishers at ordinary times; if the vehicle is equipped with a dry powder fire extinguisher, it is best to go to the local fire fighting equipment store to check once a year, mainly to check whether the dry powder powder is agglomerated, and whether the pressure of the built-in nitrogen bottle that provides jet power drops, etc. .
No dangerous items left in the car
Lighters, perfumes, air fresheners, etc. in daily life are also dangerous goods that constitute car fires. If these goods are placed in the car, the vehicle may explode after exposure to the sun. Therefore, check the compartment before locking the car, and do not leave these dangerous goods. In addition, ordinary vehicles should try not to carry dangerous goods such as gasoline and diesel.
Don’t be nervous after danger
If the vehicle does spontaneously ignite, don’t be nervous. Most of the spontaneous combustion will have precursors: such as local smoke, burnt smell, etc. If the owner finds that the vehicle is abnormal, he should stop quickly and do not rush to rescue the property in the vehicle to avoid burns and scalds.
Many vehicles can extinguish spontaneous combustion in the early stage, but they often cause unnecessary losses due to the nervousness of the owners. After a fire occurs, you should report to the police as soon as possible under the premise of ensuring your own safety, and avoid panic because you try to make use of on-board fire extinguishers or other fire extinguishing equipment for initial remedial action.
*Good for spontaneous combustion insurance
For spontaneous combustion of vehicles, insurance companies generally have spontaneous combustion insurance, that is, additional spontaneous combustion loss insurance for vehicles, which stipulates that the insured motor vehicle is in spontaneous combustion if the fire is caused by the failure of its own electrical appliances, wiring, and fuel supply system during use. , If the driver is covered by spontaneous combustion insurance, the insurance company can pay for it.
Invasion of Water: Rain
In the scorching summer, heavy rains come at any time. The safety of driving on rainy days requires special attention, but the summary is nothing more than driving, wading, line of sight, tires and other key points.
take the lead
When driving on rainy days, try to use the second or third gear, and the speed should not exceed 40 kilometers per hour. When driving on rainy days, you need to pay attention to pedestrians on the road. The best way to avoid skidding on slippery roads is to drive slowly.
Avoid low tire pressure
Rainy driving will put higher requirements on the tires, and the depth of the tire pattern in the rainy season can be guaranteed to be more than 4mm. Because the tread depth is too low, it is easy to form a water film between the tread and the water surface, causing the car to run off, flick the tail and increase the braking distance.
Pass through the stagnant area at low speed and high speed
When passing through the stagnant area, you should use to block the vehicle and hold the throttle. You must not stop, change gears or make a sharp turn when passing through. Because once the car is turned off, the exhaust pipe will immediately flow back into the water, causing damage to the exhaust system. At the same time, the vehicle cannot drive too fast when wading. In addition, generally do not pass through the water depth below the center of the wheel or the exhaust pipe *best.
Solve the problem of unclear vision in time while driving
When driving on a rainy day, using the headlights will form a dazzling light curtain. Use fog lights instead. If fog is produced on the front glass and blur the line of sight, you need to turn on the cooling switch of the air conditioner and blow the glass with cold air. This can quickly make the line of sight clear. When the windshield appears foggy, you need to turn on the rear windshield heater to eliminate the fog as soon as possible. If the wiper does not sweep the water thoroughly and the rain sticks to the car glass, you can put the car wax map on the car window to make the glass surface wax Membrane, sight range.

Link to this article:Hot summer car maintenance strategy

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Cnc Machining,Thank

Comments

Popular posts from this blog

What are the characteristics of the CNC turning process?

What are the characteristics of the CNC turning process? Turning is a method of cutting the workpiece on the lathe by rotating the workpiece relative to the tool. Turning is the most basic and common cutting processing method. Most workpieces with revolving surfaces can be processed by turning methods, such as inner and outer cylindrical surfaces, inner and outer conical surfaces, end surfaces, grooves, threads, and rotary forming surfaces. Common lathes can be divided into horizontal lathes, floor lathes, vertical lathes, turret lathes and profiling lathes, and most of them are horizontal lathes.

The Influence of CNC Turning and Milling Machining on Turning Efficiency

The cutting efficiency of CNC lathes will be affected by human factors, environmental factors and the machine tool itself. Let's talk about the influence of cutting amount and cutting tools on CNC lathe processing among many factors.   Reasonable cutting amount can improve the efficiency of CNC lathe. When the   laser  cutting  speed is increased by 10 times and the feed rate is increased by 20 times, far beyond the traditional cutting forbidden zone, the cutting mechanism has undergone a fundamental change.   The result of CNC turning  and milling combined processing is: the metal removal rate per unit power is increased by 30% to 40%, the cutting force is reduced by 30%, the cutting life of the tool is increased by 70%, and the cutting left on the workpiece is greatly reduced. Heat, cutting vibration almost disappeared; cutting processing has taken an essential leap. According to the current situation of CNC lathes, increase the feed per tooth, improve pr...

Machining and welding process notes for TC4 titanium alloy parts

Common welding methods for titanium and titanium alloys are as follows: Argon arc welding, submerged arc welding, vacuum electron beam welding, etc. Tungsten argon arc welding is used for thicknesses of 3 mm or less, and argon arc welding is done for 3 mm or more. The purity of argon is over 99.99%, and the content of air and water vapor in argon is strictly controlled. Currently, for TC4 titanium alloys, argon arc welding, plasma arc welding are often used for welding, but both methods need to be filled with welding material. Limitations on shield gas, purity and effectiveness increase the oxygen content of the joint, reduce its strength and increase its post-weld deformation. Electron beam welding and laser beam welding are used. The following is a description of precision welding and precautions for TC4 titanium alloy. 1. Weld hole problem Table of Contents 1. Weld hole problem 2, internal quality of welded part 3. Weld depth and its variation 4, j...