Skip to main content

Doppy oil and gas micro lubrication has obvious advantages

Oil-air lubrication is different from other traditional lubrication methods, and Doppel’s micro-air-air lubrication technology has obvious advantages.

Modular structure design, the number of lubrication points increases or decreases according to the actual situation.The amount of oil and gas can be supplied regularly and quantitatively, realizing on-demand supply and avoiding resource waste;

Oil-air lubrication can maintain the bearing position and friction position with continuous fresh lubricating oil input and reduce the temperature rise of the bearing. Tests have proved that at the same speed, the use of oil-air lubrication for spindle bearings of the same model and working conditions can reduce the temperature rise of the outer ring by 9℃～16℃ compared with oil mist lubrication. If the temperature rise of the bearing outer ring is kept the same, the oil-air lubrication is used Can increase bearing speed factor by more than 25%;

Oil-air lubrication has no or very little pollution to the environment.The compressed air is basically discharged through the bearing, which does not contain oil or contains very little oil, which is beneficial to the health of the operator;

Due to the continuous supply of fresh lubricating oil and the outflow of fresh air inside the bearing, it is difficult for foreign impurities to enter, and internal dirt is also easy to discharge, which can increase the service life of the bearing.

Oil-air lubrication is the continuous and accurate delivery of a small amount of lubricating oil to the electric spindle bearing, which has the advantages of energy saving and environmental protection, and extremely high reliability.

It can be seen that Peifeng Doppel Micro-Oil-air Lubrication not only has unique and professional technical advantages, but also conforms to the spirit of resource-saving, environment-friendly, reasonable lubrication, and high-efficiency that China is currently advocating, and has broad development prospects.

Link to this article：Doppy oil and gas micro lubrication has obvious advantages

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank

Comments

Post a Comment

Popular posts from this blog

Semikron SKM600GA124D

# SKM600GA124D Semikron SKM600GA124D New SKM600GA124D Low Loss IGBT Module;600A/1200V/1U SKM600GA124D, SKM600GA124D pictures, SKM600GA124D price, #SKM600GA124D supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/skm600ga124d.html ------------------------------------------------------------------- SKM600GA124D Description Features • N Channel, enhancement mode • Short internal connections avoid oscillations • With built-in gate resistor chips (“R”) Rgtotal = 1,3 Ω • Without hard mould (environmental aspects) • Isolated copper baseplate using DCB Direct Copper Bonding Ceramic • All electrical connections on top for easy busbaring • Large clearance (10 mm) and creepage d...
Post a Comment
Read more

IXYS DSS2X160-01A

# DSS2X160-01A IXYS DSS2X160-01A New Rectifier Diode Schottky 1 Phase 2 Element 160A 100V V(RRM) Silicon MINI BLOC SOT-227 2 PIN, DSS2X160-01A pictures, DSS2X160-01A price, #DSS2X160-01A supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/dss2x160-01a.html ------------------------------------------------------------------- Manufacturer Part Number: DSS2X160-01A Pbfree Code: Yes Part Life Cycle Code: Active Ihs Manufacturer: IXYS CORP Part Package Code: SOT-227 Package Description: R-XUFM-N2 Pin Count: 4 ECCN Code: EAR99 HTS Code: 8541.10.00.80 Manufacturer: IXYS Corporation Additional Feature: FREE WHEELING DIODE Application: GENERAL PURPOSE Case Connection: CATHODE Configuration: COMMON CATHODE, 2 ELEMENTS Diode Element Material: SILICON Diode Type: ...
Post a Comment
Read more

Elimination of Gear Backlash in CNC Machining Feed System

Elimination of Gear Backlash in CNC Machining Feed System   The transmission gear in the feed system of the CNC machining machine tool must eliminate the transmission gap between the meshing gears as much as possible, otherwise the motion will lag behind the command signal after each reversal of the feed system, which will affect the machining accuracy (accuracy) ). There are the following two common methods for CNC machining machine tools to eliminate the transmission gear gap.   1. Rigidity adjustment method   The rigid adjustment method is an adjustment method that cannot be automatically compensated for the tooth side clearance after adjustment. Therefore, the pitch tolerance and tooth thickness of the gear must be strictly controlled, otherwise the flexibility of the transmission will be affected. This adjustment method has a relatively simple structure and a better transmission rigidity.   (1) Eccentric shaft adjustment method   As shown in Figure 610, the...
Post a Comment
Read more