Skip to main content

What are the matters needing attention in five-axis processing of communication equipment

Anyone who knows CNC equipment knows that the processing configurations used by CNC equipment for processing different types of products are different, that is to say, if you want to process more precise parts, you need to use communication equipment five-axis processing, but if the control is not good, it will affect the quality of the parts. In order to avoid this situation, it is necessary to pay attention to the following points when using five-axis machining.

1. Pay attention to strictly abide by personnel operating regulations

Equipment such as five-axis processing is relatively dangerous during operation. Careless operation of personnel can lead to injuries. As long as the operation specifications are followed to avoid personal injury, such as wearing protective equipment as required, do not wear scarves , Gloves and leaders, women should also pull up their hair and wear hats, etc. Therefore, it is important to pay attention to strictly abide by the personnel operating regulations.

2. Pay attention to the trial run before processing

It is only the beginning to make the adjustment of tool compensation, machine zero point and workpiece zero point before starting up, and check the equipment protection, insurance, signal and position part, but more importantly, start the trial operation of the machine. Many people may think that it can be turned on directly after the inspection is completed. In fact, it is impossible to check the operating conditions of the lubrication, mechanical, electrical, hydraulic, digital display and other systems without trial operation. Therefore, the trial operation before processing is very important.

3. Pay attention to the parts inspection before starting up

The five-axis processing of reputable communication equipment needs to pay attention to the corresponding preparations before the equipment is turned on. For example, the inspection of important parts and items needs to be paid attention to, because many parts, switches, insurance and protection in the equipment are all It may be a hidden danger point for the equipment after operation. If we cannot do an inspection at the beginning, the bad consequences after opening it are unimaginable, so it is very important to do a good job of inspection before starting the machine.

In most cases, general Cnc Machine tools can process many common parts, but high-quality parts require five-axis machining such as CNC equipment. Therefore, if you want to make better parts, you must not only know where the five-axis machining of communication equipment is. It is sold, and you need to know what to focus on when using this five-axis machining.

Link to this article：What are the matters needing attention in five-axis processing of communication equipment

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank

Comments

Post a Comment

Popular posts from this blog

Semikron SKM600GA124D

# SKM600GA124D Semikron SKM600GA124D New SKM600GA124D Low Loss IGBT Module;600A/1200V/1U SKM600GA124D, SKM600GA124D pictures, SKM600GA124D price, #SKM600GA124D supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/skm600ga124d.html ------------------------------------------------------------------- SKM600GA124D Description Features • N Channel, enhancement mode • Short internal connections avoid oscillations • With built-in gate resistor chips (“R”) Rgtotal = 1,3 Ω • Without hard mould (environmental aspects) • Isolated copper baseplate using DCB Direct Copper Bonding Ceramic • All electrical connections on top for easy busbaring • Large clearance (10 mm) and creepage d...
Post a Comment
Read more

Advantages of five-axis machining of aluminum alloy parts

Aluminum alloy is a very good material for parts. Its low density can achieve lightweight parts and its strength is very high even comparable to steel. In addition, its corrosion resistance, electrical conductivity and thermal conductivity are very good. But there is a major defect that precision machining is very difficult, but the emergence of five-axis machining technology has solved this problem well. Today, let’s take a look at the advantages of five-axis machining of this aluminum alloy part. 1. Reduce processing time Table of Contents 1. Reduce processing time 2. Improve processing accuracy 3. High production efficiency In the processing, the flat-bottomed end mill is used to maintain the vertical surface of the complex mold processing surface, which can greatly reduce the processing time. It is also suitable for side milling with angled surfaces, which can eliminate the rib-like shape caused by the spherical end mill processing. The texture...
Post a Comment
Read more

IXYS DSS2X160-01A

# DSS2X160-01A IXYS DSS2X160-01A New Rectifier Diode Schottky 1 Phase 2 Element 160A 100V V(RRM) Silicon MINI BLOC SOT-227 2 PIN, DSS2X160-01A pictures, DSS2X160-01A price, #DSS2X160-01A supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/dss2x160-01a.html ------------------------------------------------------------------- Manufacturer Part Number: DSS2X160-01A Pbfree Code: Yes Part Life Cycle Code: Active Ihs Manufacturer: IXYS CORP Part Package Code: SOT-227 Package Description: R-XUFM-N2 Pin Count: 4 ECCN Code: EAR99 HTS Code: 8541.10.00.80 Manufacturer: IXYS Corporation Additional Feature: FREE WHEELING DIODE Application: GENERAL PURPOSE Case Connection: CATHODE Configuration: COMMON CATHODE, 2 ELEMENTS Diode Element Material: SILICON Diode Type: ...
Post a Comment
Read more