Skip to main content

Discussion on Asymmetry of Filter Paper in Automobile

In typical automotive filtration applications, laminar flow occurs, so you can consider the application of log-normal pore distribution technology. A more important structure is that loose paper not only has a larger number of pores than compact paper, but also finer. The hole size has a wide range, so it is impossible to use conventional papermaking methods to produce a paper sheet with a large number of uniform pores.

In the case of organic liquid with a certain pressure head as the background, let air pass through the paper in a boosted state, and then analyze the air flow to obtain the distribution of pores. Unfortunately, it is not yet possible to establish a correlation between the measured pore distribution and the filter paper's particle removal efficiency. The main reason lies in the complexity of the mechanism by which particles are removed when the liquid flows through the filter medium. A simple filtration process, in fact, it is very dangerous to infer anything about filtration performance based on the pore size value.

Therefore, the current design of automotive filter paper is mainly based on accumulated experience and knowledge plus new ideas provided by paper structure analysis, rather than based on the unquestionable reality of filtering behavior.

The filter paper has a positive asymmetry that is easy to see. The upper surface is looser and the permeability is high, and the lower surface gradually becomes tighter and the permeability is low. The filter performance of the filter paper is obviously determined by which surface of the filter paper is used as the upstream side during filtration. Therefore, the filter paper manufacturer should mark the lower surface of the filter paper (usually a color line) to make it easy for the filter manufacturer to recognize and use the upper surface as the upper side.

For automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.

Link to this article：Discussion on Asymmetry of Filter Paper in Automobile

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank

Comments

Post a Comment

Popular posts from this blog

What are the characteristics of the CNC turning process?

What are the characteristics of the CNC turning process? Turning is a method of cutting the workpiece on the lathe by rotating the workpiece relative to the tool. Turning is the most basic and common cutting processing method. Most workpieces with revolving surfaces can be processed by turning methods, such as inner and outer cylindrical surfaces, inner and outer conical surfaces, end surfaces, grooves, threads, and rotary forming surfaces. Common lathes can be divided into horizontal lathes, floor lathes, vertical lathes, turret lathes and profiling lathes, and most of them are horizontal lathes.
1 comment
Read more

The Influence of CNC Turning and Milling Machining on Turning Efficiency

The cutting efficiency of CNC lathes will be affected by human factors, environmental factors and the machine tool itself. Let's talk about the influence of cutting amount and cutting tools on CNC lathe processing among many factors.   Reasonable cutting amount can improve the efficiency of CNC lathe. When the   laser  cutting  speed is increased by 10 times and the feed rate is increased by 20 times, far beyond the traditional cutting forbidden zone, the cutting mechanism has undergone a fundamental change.   The result of CNC turning  and milling combined processing is: the metal removal rate per unit power is increased by 30% to 40%, the cutting force is reduced by 30%, the cutting life of the tool is increased by 70%, and the cutting left on the workpiece is greatly reduced. Heat, cutting vibration almost disappeared; cutting processing has taken an essential leap. According to the current situation of CNC lathes, increase the feed per tooth, improve pr...
1 comment
Read more

Machining and welding process notes for TC4 titanium alloy parts

Common welding methods for titanium and titanium alloys are as follows: Argon arc welding, submerged arc welding, vacuum electron beam welding, etc. Tungsten argon arc welding is used for thicknesses of 3 mm or less, and argon arc welding is done for 3 mm or more. The purity of argon is over 99.99%, and the content of air and water vapor in argon is strictly controlled. Currently, for TC4 titanium alloys, argon arc welding, plasma arc welding are often used for welding, but both methods need to be filled with welding material. Limitations on shield gas, purity and effectiveness increase the oxygen content of the joint, reduce its strength and increase its post-weld deformation. Electron beam welding and laser beam welding are used. The following is a description of precision welding and precautions for TC4 titanium alloy. 1. Weld hole problem Table of Contents 1. Weld hole problem 2, internal quality of welded part 3. Weld depth and its variation 4, j...
Post a Comment
Read more