Skip to main content

Analysis and improvement of vehicle water radiator

 

Analysis and improvement of vehicle water radiator, whether it is to reduce the number of water pipe rows in the thickness direction of the radiator core or reduce the geometric size of the water pipes, the result will cause a reduction in the heat dissipation area, which will obviously affect the heat dissipation of the entire radiator performance. In order to make up for the loss of performance due to the reduction of heat dissipation area, the most effective method is to develop high-efficiency heat sinks. The louver-shaped zigzag heat sink is a high-efficiency heat-dissipating element, which is the result of increasing the local heat release coefficient after developing a cut on the heat transfer surface in the direction of the air flow. Polhausen explained the basic way to improve the heat dissipation coefficient of the notched heat sink, and applied this theory to various notches formed at intervals. According to sand, if the fluid velocity and physical parameters are the same, the heat release coefficient is inversely proportional to the cut spacing.

Japanese car water radiator adopts high-efficiency louvered heat dissipation belt. Under the premise of increasing the heat release coefficient by %, the number of water pipes is reduced by half, the volume of the core body is reduced by 50%, and the weight of the whole machine is also reduced, which fully demonstrates the high efficiency. The role of heat dissipation components. Russia widely uses cold-rolled finned tubes as heat exchange elements, which also solves the high-performance problem of heat exchangers on vehicles and ships.

When designing a car water radiator, it is necessary to try to overcome the current mismatch between the heat dissipation capacity of the water radiator belt and the weight of the water radiator. The development of high-efficiency air-side cooling components is the core and foundation of the development of high-performance, high-compact, lightweight vehicle water radiators, and it is also an effective way to develop a new generation of water radiators for main battle tanks.

The automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.

Link to this article：Analysis and improvement of vehicle water radiator

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank

Comments

Post a Comment

Popular posts from this blog

What are the characteristics of the CNC turning process?

What are the characteristics of the CNC turning process? Turning is a method of cutting the workpiece on the lathe by rotating the workpiece relative to the tool. Turning is the most basic and common cutting processing method. Most workpieces with revolving surfaces can be processed by turning methods, such as inner and outer cylindrical surfaces, inner and outer conical surfaces, end surfaces, grooves, threads, and rotary forming surfaces. Common lathes can be divided into horizontal lathes, floor lathes, vertical lathes, turret lathes and profiling lathes, and most of them are horizontal lathes.
1 comment
Read more

The Influence of CNC Turning and Milling Machining on Turning Efficiency

The cutting efficiency of CNC lathes will be affected by human factors, environmental factors and the machine tool itself. Let's talk about the influence of cutting amount and cutting tools on CNC lathe processing among many factors.   Reasonable cutting amount can improve the efficiency of CNC lathe. When the   laser  cutting  speed is increased by 10 times and the feed rate is increased by 20 times, far beyond the traditional cutting forbidden zone, the cutting mechanism has undergone a fundamental change.   The result of CNC turning  and milling combined processing is: the metal removal rate per unit power is increased by 30% to 40%, the cutting force is reduced by 30%, the cutting life of the tool is increased by 70%, and the cutting left on the workpiece is greatly reduced. Heat, cutting vibration almost disappeared; cutting processing has taken an essential leap. According to the current situation of CNC lathes, increase the feed per tooth, improve pr...
1 comment
Read more

Machining and welding process notes for TC4 titanium alloy parts

Common welding methods for titanium and titanium alloys are as follows: Argon arc welding, submerged arc welding, vacuum electron beam welding, etc. Tungsten argon arc welding is used for thicknesses of 3 mm or less, and argon arc welding is done for 3 mm or more. The purity of argon is over 99.99%, and the content of air and water vapor in argon is strictly controlled. Currently, for TC4 titanium alloys, argon arc welding, plasma arc welding are often used for welding, but both methods need to be filled with welding material. Limitations on shield gas, purity and effectiveness increase the oxygen content of the joint, reduce its strength and increase its post-weld deformation. Electron beam welding and laser beam welding are used. The following is a description of precision welding and precautions for TC4 titanium alloy. 1. Weld hole problem Table of Contents 1. Weld hole problem 2, internal quality of welded part 3. Weld depth and its variation 4, j...
Post a Comment
Read more