Skip to main content

Car glass cleaning is very important in rainy weather

The cleaning of car windows is not only an issue of appearance, but also a necessity in terms of safety. Especially on rainy nights, the dazzling oil film will affect the field of vision and must be removed immediately. If it is slightly dirty, you can wipe it with a towel and car without using a car body cleaner. You can wipe it off immediately or remove the oil film. After the dirt is completely removed, apply a protective agent, which can make the oil film difficult to adhere.

1. Dirty car windows threaten safety. When driving at night on rainy days, the wiper wiped off and the residual oil film is dazzling, which greatly affects the vision.

2. Thoroughly clean the windows of the car, the vision is immediately clear, and it is easier and safer to drive at night.

3. If the oil film attached to the glass is difficult to remove by ordinary methods, use a chemical synthetic agent for removing the oil film to wipe it.

4. Not only the outside, but also the interior of the glass must be wiped. The insulation line must be wiped horizontally. If it is wiped vertically, the insulation line may be broken.

5. A car window protectant that can effectively prevent dirt and oil film from adhering to the glass surface. But before use, you must clean the car windows, otherwise it will be difficult to have an effect.

6. After the protective agent dries, it will turn white just like waxing. Just wipe it off with a soft cloth.

7. After the protective agent is applied, the water will roll off in granular form. If the rain is not heavy, you don’t even need to activate the wiper.

8. There are also protective agents added to the water tank. Just clean the windshield before use, otherwise the effect will not be good.

The automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.

Link to this article:Car glass cleaning is very important in rainy weather

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Cnc Machining,Thank

Comments

Popular posts from this blog

IXYS DSS2X160-01A

# DSS2X160-01A IXYS DSS2X160-01A New Rectifier Diode Schottky 1 Phase 2 Element 160A 100V V(RRM) Silicon MINI BLOC SOT-227 2 PIN, DSS2X160-01A pictures, DSS2X160-01A price, #DSS2X160-01A supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/dss2x160-01a.html ------------------------------------------------------------------- Manufacturer Part Number: DSS2X160-01A Pbfree Code: Yes Part Life Cycle Code: Active Ihs Manufacturer: IXYS CORP Part Package Code: SOT-227 Package Description: R-XUFM-N2 Pin Count: 4 ECCN Code: EAR99 HTS Code: 8541.10.00.80 Manufacturer: IXYS Corporation Additional Feature: FREE WHEELING DIODE Application: GENERAL PURPOSE Case Connection: CATHODE Configuration: COMMON CATHODE, 2 ELEMENTS Diode Element Material: SILICON Diode Type: ...

Advantages of five-axis machining of aluminum alloy parts

Aluminum alloy is a very good material for parts. Its low density can achieve lightweight parts and its strength is very high even comparable to steel. In addition, its corrosion resistance, electrical conductivity and thermal conductivity are very good. But there is a major defect that precision machining is very difficult, but the emergence of five-axis machining technology has solved this problem well. Today, let’s take a look at the advantages of five-axis machining of this aluminum alloy part. 1. Reduce processing time Table of Contents 1. Reduce processing time 2. Improve processing accuracy 3. High production efficiency In the processing, the flat-bottomed end mill is used to maintain the vertical surface of the complex mold processing surface, which can greatly reduce the processing time. It is also suitable for side milling with angled surfaces, which can eliminate the rib-like shape caused by the spherical end mill processing. The texture...

Elimination of Gear Backlash in CNC Machining Feed System

Elimination of Gear Backlash in CNC Machining Feed System   The transmission gear in the feed system of the CNC machining machine tool must eliminate the transmission gap between the meshing gears as much as possible, otherwise the motion will lag behind the command signal after each reversal of the feed system, which will affect the machining accuracy (accuracy) ). There are the following two common methods for CNC machining machine tools to eliminate the transmission gear gap.   1. Rigidity adjustment method   The rigid adjustment method is an adjustment method that cannot be automatically compensated for the tooth side clearance after adjustment. Therefore, the pitch tolerance and tooth thickness of the gear must be strictly controlled, otherwise the flexibility of the transmission will be affected. This adjustment method has a relatively simple structure and a better transmission rigidity.   (1) Eccentric shaft adjustment method   As shown in Figure 610, the...