Skip to main content

Sharp LQ190E1LX78

Sharp LQ190E1LX78
#LQ190E1LX78 Sharp LQ190E1LX78 New Sharp 19 inch LCM 1280×1024 1200 1500:1 85/85/85/85 16.7M WLED LVDS, LQ190E1LX78 pictures, LQ190E1LX78 price, #LQ190E1LX78 supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Brand Sharp
Model LQ190E1LX78  
Diagonal Size 19.0 inch
Type a-Si TFT-LCD, LCM 
Pixel Format 1280(RGB)×1024  [SXGA]  86PPI
Configuration RGB Vertical Stripe
Active Area 376.32(H)×301.056(V) mm
Outline Dim 398.1(H)×329.5(V) ×18.5(D) mm
Bezel Area 380.65(H)×306.5(V) mm
Treatment Antiglare (Haze 3%), Hard coating (3H)
Luminance 1200 cd/m² (Typ.)
Contrast Ratio 1500:1 (Typ.) (TM)    
View Direction Symmetry
Response Time 35 (Typ.)(Tr+Td)
Viewing Angle 85/85/85/85 (Typ.)(CR≥10) Left / Right / Up / Down
Operating Mode ASV, Normally Black, Transmissive 
Support Color 16.7M   100% s RGB
Light Source WLED , 60K hours , With LED Driver
Weight 2.30Kgs (Max.)
Designed For Industrial Outdoor High Brightness Gaming
Frame Rate 60Hz
Touch Panel Without
Interface Type LVDS (2 ch, 8-bit) , 30 pins Connector
Power Supply 5.0V (Typ.) 
Environment Operating Temperature: -20 ~ 65 °C ; Storage Temperature: -25 ~ 70 °C
LQ190E1LX78 inverter, LQ190E1LX78 power supply, LQ190E1LX78 electronic board, LQ190E1LX78 VGA board, LQ190E1LX78 touchscreen available.

Comments

Popular posts from this blog

What are the characteristics of the CNC turning process?

What are the characteristics of the CNC turning process? Turning is a method of cutting the workpiece on the lathe by rotating the workpiece relative to the tool. Turning is the most basic and common cutting processing method. Most workpieces with revolving surfaces can be processed by turning methods, such as inner and outer cylindrical surfaces, inner and outer conical surfaces, end surfaces, grooves, threads, and rotary forming surfaces. Common lathes can be divided into horizontal lathes, floor lathes, vertical lathes, turret lathes and profiling lathes, and most of them are horizontal lathes.

The Influence of CNC Turning and Milling Machining on Turning Efficiency

The cutting efficiency of CNC lathes will be affected by human factors, environmental factors and the machine tool itself. Let's talk about the influence of cutting amount and cutting tools on CNC lathe processing among many factors.   Reasonable cutting amount can improve the efficiency of CNC lathe. When the   laser  cutting  speed is increased by 10 times and the feed rate is increased by 20 times, far beyond the traditional cutting forbidden zone, the cutting mechanism has undergone a fundamental change.   The result of CNC turning  and milling combined processing is: the metal removal rate per unit power is increased by 30% to 40%, the cutting force is reduced by 30%, the cutting life of the tool is increased by 70%, and the cutting left on the workpiece is greatly reduced. Heat, cutting vibration almost disappeared; cutting processing has taken an essential leap. According to the current situation of CNC lathes, increase the feed per tooth, improve pr...

Alternate vehicles, transportation equipment and field work machine oil in all seasons adapt to changes in temperature

  Foreign oil companies adopt tracking services for key users. Whenever the oil change period is approaching and users need to buy oil, they will test the oil for free in advance, issue an inspection report, and actively provide key users with a scientific basis for oil change. This kind of thoughtful service not only shortens the distance with users, but also improves the credibility of the brand. The alternation of the four seasons requires the oil used in vehicles, transportation equipment and field work tools to adapt to changes in temperature, especially in the north. Lubricants of different viscosity grades are usually replaced at the end of autumn and spring, thus forming a peak season for lubricating oil sales. Foreign oil companies attach great importance to the promotional activities in these two seasons. In the autumn, they launched low pour point, low viscosity grades of multi-grade antifreeze and antifreeze, and accompanied the promotion a...