Skip to main content

LG LM190E05-SL02

LG LM190E05-SL02
#LM190E05-SL02 LG LM190E05-SL02 New LG Display 19 inch LCM 1280×1024 280 600:1 89/89/89/89 16.7M CCFL LVDS, LM190E05-SL02 pictures, LM190E05-SL02 price, #LM190E05-SL02 supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Manufacturer LG.Philips LCD
Model Name LM190E05-SL02  
Screen Size 19.0 inch
Screen Type LCM,   a-Si TFT-LCD
Pixel Number 1280(RGB)×1024   (SXGA)  86PPI
Arrangement RGB Vertical Stripe
Active Area(mm) 376.32 × 301.056 (H×V)
Outline(mm) 396 × 324 × 20.5 (H×V×D)
Bezel Area(mm) 380.3 × 305.0 (H×V)
Treatment Antiglare, Hard coating (3H)
Luminance 280 cd/m² (Typ.)
Contrast Ratio 600 : 1 (Typ.) (TM)    
Viewing Angle 89/89/89/89 (Typ.)(CR≥10) Left / Right / Up / Down
Response 7/11 (Typ.)(Tr/Td); 14 (Typ.)(G to G) ms
Good View at Symmetry
Work Mode IPS, Normally Black, Transmissive
Color Depth 16.7M   70% NTSC
Backlight 6 pcs CCFL , 45K hours , No Driver
Mass 2.97/3.12Kgs (Typ./Max.)
Used for Desktop Monitor
Refresh Rate 60Hz 
120Hz (60HZ Input) : Embedded MEMC Circuit
120Hz+120Hz : 120Hz Panel+120Hz Backlight
240Hz (60HZ Input) : Embedded MEMC Circuit
Touchscreen Without
Signal Type LVDS (2 ch, 8-bit) , Connector 30 pins
Voltage Supply 12.0V (Typ.)
Max. Ratings Storage Temp.: -20 ~ 60 °C    Operating Temp.: 0 ~ 50 °C 
LM190E05-SL02 inverter, LM190E05-SL02 power supply, LM190E05-SL02 electronic board, LM190E05-SL02 VGA board, LM190E05-SL02 touchscreen available.

Comments

Post a Comment

Popular posts from this blog

IXYS DSS2X160-01A

# DSS2X160-01A IXYS DSS2X160-01A New Rectifier Diode Schottky 1 Phase 2 Element 160A 100V V(RRM) Silicon MINI BLOC SOT-227 2 PIN, DSS2X160-01A pictures, DSS2X160-01A price, #DSS2X160-01A supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/dss2x160-01a.html ------------------------------------------------------------------- Manufacturer Part Number: DSS2X160-01A Pbfree Code: Yes Part Life Cycle Code: Active Ihs Manufacturer: IXYS CORP Part Package Code: SOT-227 Package Description: R-XUFM-N2 Pin Count: 4 ECCN Code: EAR99 HTS Code: 8541.10.00.80 Manufacturer: IXYS Corporation Additional Feature: FREE WHEELING DIODE Application: GENERAL PURPOSE Case Connection: CATHODE Configuration: COMMON CATHODE, 2 ELEMENTS Diode Element Material: SILICON Diode Type: ...
Post a Comment
Read more

Semikron SKM600GA124D

# SKM600GA124D Semikron SKM600GA124D New SKM600GA124D Low Loss IGBT Module;600A/1200V/1U SKM600GA124D, SKM600GA124D pictures, SKM600GA124D price, #SKM600GA124D supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/skm600ga124d.html ------------------------------------------------------------------- SKM600GA124D Description Features • N Channel, enhancement mode • Short internal connections avoid oscillations • With built-in gate resistor chips (“R”) Rgtotal = 1,3 Ω • Without hard mould (environmental aspects) • Isolated copper baseplate using DCB Direct Copper Bonding Ceramic • All electrical connections on top for easy busbaring • Large clearance (10 mm) and creepage d...
Post a Comment
Read more

Elimination of Gear Backlash in CNC Machining Feed System

Elimination of Gear Backlash in CNC Machining Feed System   The transmission gear in the feed system of the CNC machining machine tool must eliminate the transmission gap between the meshing gears as much as possible, otherwise the motion will lag behind the command signal after each reversal of the feed system, which will affect the machining accuracy (accuracy) ). There are the following two common methods for CNC machining machine tools to eliminate the transmission gear gap.   1. Rigidity adjustment method   The rigid adjustment method is an adjustment method that cannot be automatically compensated for the tooth side clearance after adjustment. Therefore, the pitch tolerance and tooth thickness of the gear must be strictly controlled, otherwise the flexibility of the transmission will be affected. This adjustment method has a relatively simple structure and a better transmission rigidity.   (1) Eccentric shaft adjustment method   As shown in Figure 610, the...
Post a Comment
Read more