Skip to main content

LG Display LB043WQ2-TD02

LG Display LB043WQ2-TD02
#LB043WQ2-TD02 LG Display LB043WQ2-TD02 New LG Display 4.3inch LCM 480×272 450 400:1 70/70/65/55 16.7M WLED TTL, LB043WQ2-TD02 pictures, LB043WQ2-TD02 price, #LB043WQ2-TD02 supplier
-------------------------------------------------------------------
Email: [email protected]

-------------------------------------------------------------------
Panel Brand LG Display
Panel Model LB043WQ2-TD02  
Panel Size 4.3 inch
Panel Type a-Si TFT-LCD, LCM
Resolution 480×272(RGB), WQVGA, 128PPI
Pixel Format RGB Horizontal Stripe
Display Area 95.04(W)×53.856(H) mm
Bezel Opening 98.84(W)×57.06(H) mm
Outline Size 105.5(W)×67.2(H) mm
Surface Antiglare
Brightness 450 cd/m² (Typ.)
Contrast Ratio 400:1 (Typ.) (TM)    
Viewing Angle 70/70/65/55 (Typ.)(CR≥10) Left / Right / Up / Down
Display Mode TN, Normally White, Transmissive 
Best View on 12 o'clock
Response Time 25 (Typ.)(Tr+Td)
Display Colors 16.7M 
Lamp Type 10S1P WLED , Without Driver
Frequency 60Hz
Touch Screen Without
Panel Weight 50.0g (Typ.)
Application Portable Navigation MP3 PMP
Signal Interface Parallel RGB (1 ch, 8-bit) , 45 pins FPC
Input Voltage 2.5/3.3V (Typ.)(VDD)
Environment Operating Temp.: -20 ~ 70 °C ; Storage Temp.: -30 ~ 80 °C
LB043WQ2-TD02 inverter, LB043WQ2-TD02 power supply, LB043WQ2-TD02 electronic board, LB043WQ2-TD02 VGA board, LB043WQ2-TD02 touchscreen available.

Comments

Post a Comment

Popular posts from this blog

What are the characteristics of the CNC turning process?

What are the characteristics of the CNC turning process? Turning is a method of cutting the workpiece on the lathe by rotating the workpiece relative to the tool. Turning is the most basic and common cutting processing method. Most workpieces with revolving surfaces can be processed by turning methods, such as inner and outer cylindrical surfaces, inner and outer conical surfaces, end surfaces, grooves, threads, and rotary forming surfaces. Common lathes can be divided into horizontal lathes, floor lathes, vertical lathes, turret lathes and profiling lathes, and most of them are horizontal lathes.
1 comment
Read more

The Influence of CNC Turning and Milling Machining on Turning Efficiency

The cutting efficiency of CNC lathes will be affected by human factors, environmental factors and the machine tool itself. Let's talk about the influence of cutting amount and cutting tools on CNC lathe processing among many factors.   Reasonable cutting amount can improve the efficiency of CNC lathe. When the   laser  cutting  speed is increased by 10 times and the feed rate is increased by 20 times, far beyond the traditional cutting forbidden zone, the cutting mechanism has undergone a fundamental change.   The result of CNC turning  and milling combined processing is: the metal removal rate per unit power is increased by 30% to 40%, the cutting force is reduced by 30%, the cutting life of the tool is increased by 70%, and the cutting left on the workpiece is greatly reduced. Heat, cutting vibration almost disappeared; cutting processing has taken an essential leap. According to the current situation of CNC lathes, increase the feed per tooth, improve pr...
1 comment
Read more

Machining and welding process notes for TC4 titanium alloy parts

Common welding methods for titanium and titanium alloys are as follows: Argon arc welding, submerged arc welding, vacuum electron beam welding, etc. Tungsten argon arc welding is used for thicknesses of 3 mm or less, and argon arc welding is done for 3 mm or more. The purity of argon is over 99.99%, and the content of air and water vapor in argon is strictly controlled. Currently, for TC4 titanium alloys, argon arc welding, plasma arc welding are often used for welding, but both methods need to be filled with welding material. Limitations on shield gas, purity and effectiveness increase the oxygen content of the joint, reduce its strength and increase its post-weld deformation. Electron beam welding and laser beam welding are used. The following is a description of precision welding and precautions for TC4 titanium alloy. 1. Weld hole problem Table of Contents 1. Weld hole problem 2, internal quality of welded part 3. Weld depth and its variation 4, j...
Post a Comment
Read more