Skip to main content

Sharp LM018HT

Sharp LM018HT
#LM018HT Sharp LM018HT New , LM018HT pictures, LM018HT price, #LM018HT supplier
-------------------------------------------------------------------
Email: [email protected]

-------------------------------------------------------------------
LM018HT
Features
4.9 cm [1.9 inch] display size
High contrast
[Transmissive mode: 25, reflective mode: 16]
Transflective 256-color display
High chroma (Color area), 2 times greater than before
The built-in white-LED backlight realizeslow power consumption. [2.5 mW, waiting mode]
Dot format (H x V) 128 x RGB x 160 dot
Duty ratio 1/82
Pixel pitch (H x V) 0.24 x 0.24mm
Backlight type White LED
Active area (H x V) 30.7 x 38.4mm
Power consumption 2.5*3mW
Panel typeGF color*1
Overall dimensions (W x H x D) 40.4 x 53.7 x 5.15mm
Panel mode Transflective
Weight 14g
Contrast ratio 25 : 1/16 : 1*2
Operating temperature 20 to +70°C
Response time 350ms
Storage temperature-30 to +80°C
LM018HT inverter, LM018HT power supply, LM018HT electronic board, LM018HT VGA board, LM018HT touchscreen available.

Comments

Post a Comment

Popular posts from this blog

IXYS DSS2X160-01A

# DSS2X160-01A IXYS DSS2X160-01A New Rectifier Diode Schottky 1 Phase 2 Element 160A 100V V(RRM) Silicon MINI BLOC SOT-227 2 PIN, DSS2X160-01A pictures, DSS2X160-01A price, #DSS2X160-01A supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/dss2x160-01a.html ------------------------------------------------------------------- Manufacturer Part Number: DSS2X160-01A Pbfree Code: Yes Part Life Cycle Code: Active Ihs Manufacturer: IXYS CORP Part Package Code: SOT-227 Package Description: R-XUFM-N2 Pin Count: 4 ECCN Code: EAR99 HTS Code: 8541.10.00.80 Manufacturer: IXYS Corporation Additional Feature: FREE WHEELING DIODE Application: GENERAL PURPOSE Case Connection: CATHODE Configuration: COMMON CATHODE, 2 ELEMENTS Diode Element Material: SILICON Diode Type: ...
Post a Comment
Read more

Advantages of five-axis machining of aluminum alloy parts

Aluminum alloy is a very good material for parts. Its low density can achieve lightweight parts and its strength is very high even comparable to steel. In addition, its corrosion resistance, electrical conductivity and thermal conductivity are very good. But there is a major defect that precision machining is very difficult, but the emergence of five-axis machining technology has solved this problem well. Today, let’s take a look at the advantages of five-axis machining of this aluminum alloy part. 1. Reduce processing time Table of Contents 1. Reduce processing time 2. Improve processing accuracy 3. High production efficiency In the processing, the flat-bottomed end mill is used to maintain the vertical surface of the complex mold processing surface, which can greatly reduce the processing time. It is also suitable for side milling with angled surfaces, which can eliminate the rib-like shape caused by the spherical end mill processing. The texture...
Post a Comment
Read more

Elimination of Gear Backlash in CNC Machining Feed System

Elimination of Gear Backlash in CNC Machining Feed System   The transmission gear in the feed system of the CNC machining machine tool must eliminate the transmission gap between the meshing gears as much as possible, otherwise the motion will lag behind the command signal after each reversal of the feed system, which will affect the machining accuracy (accuracy) ). There are the following two common methods for CNC machining machine tools to eliminate the transmission gear gap.   1. Rigidity adjustment method   The rigid adjustment method is an adjustment method that cannot be automatically compensated for the tooth side clearance after adjustment. Therefore, the pitch tolerance and tooth thickness of the gear must be strictly controlled, otherwise the flexibility of the transmission will be affected. This adjustment method has a relatively simple structure and a better transmission rigidity.   (1) Eccentric shaft adjustment method   As shown in Figure 610, the...
Post a Comment
Read more