Skip to main content

Innolux AT080TN52 V.5

Innolux AT080TN52 V.5
#AT080TN52 V.5 Innolux AT080TN52 V.5 New Innolux 8inch LCM 800×600 190 500:1 70/70/50/70 262K/16.2M WLED TTL, AT080TN52 V.5 pictures, AT080TN52 V.5 price, #AT080TN52 V.5 supplier
-------------------------------------------------------------------
Email: [email protected]

-------------------------------------------------------------------
Panel Brand Innolux
Panel Model AT080TN52 V.5 
Panel Size 8.0"
Panel Type a-Si TFT-LCD, LCM
Resolution 800(RGB)×600, SVGA, 125PPI
Pixel Format RGB Vertical Stripe
Display Area 162(W)×121.5(H) mm
Bezel Opening 165.2(W)×124.7(H) mm
Outline Size 183(W)×141(H) mm
Brightness 190 cd/m² (Typ.)
Contrast Ratio 500:1 (Typ.) (TM)    
Viewing Angle 70/70/50/70 (Typ.)(CR≥10) Left / Right / Up / Down
Display Mode TN, Normally White, Transmissive
Best View on 6 o'clock
Response Time 10/15 (Typ.)(Tr/Td)
Display Colors 262K/16.2M 
Lamp Type 3S6P WLED , 20K hours , Without Driver
Touch Screen Without
Panel Weight TBD
Application Digital Photo Frame Portable DVD Player
Signal Interface Parallel RGB (1 ch, 6/8-bit) , 50 pins FPC
Input Voltage 3.3/10.4/15.0/-10.0V (Typ.)(VCC/AVDD/VGH/VGL)
Environment Operating Temp.: -20 ~ 60 °C ; Storage Temp.: -30 ~ 70 °C
AT080TN52 V.5 inverter, AT080TN52 V.5 power supply, AT080TN52 V.5 electronic board, AT080TN52 V.5 VGA board, AT080TN52 V.5 touchscreen available.

Comments

Post a Comment

Popular posts from this blog

Drive the preferential presetting of the spring frame of the vehicle

The secondary spring system of the original electric locomotive consists of 4 sets of the same ordinary cylindrical compression springs. Its parameters are: spring material diameter d=48mm, maximum working circle diameter D=230mm, effective working circle number n=6.6, free height H0= 528mm, working height H=431mm. The characteristic curve of the spring is approximately straight, with stable stiffness and simple structure. However, the spring stiffness is mainly along the axial direction, and its transverse shear and bending stiffness is very poor, and its anti-resonance ability is poor. After the train speeds up, its snake-like movement and shaking phenomenon intensify. Therefore, it is necessary to improve the spring system of electric locomotives. Improvement of the spring system. The improved spring parameters and characteristics take into account the special position of the secondary spring (between the bogie and the car body) and specific functions (s...
Post a Comment
Read more

Hitachi LM213XB

# LM213XB Hitachi LM213XB New LM213XB KOE 5.8inch Panel 256×64 Monochrome B/L CPU, LM213XB pictures, LM213XB price, #LM213XB supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/lm213xb.html ------------------------------------------------------------------- Panel Brand : HITACHI Panel Model : LM213XB Panel Type : STN- LCD , Panel  Panel Size : 5.8 inch Resolution : 256×64   Display Mode : STN, Yellow/Green (Positive), Reflective  Active Area : 143.31×35.79 mm Outline : 184×75×12 mm Display Colors : Monochrome     Signal Interface : 8-bit parallel , 20 pins   Input Voltage : 5.0V (Typ.)  ...
Post a Comment
Read more

China Titanium Alloy Product Processor

Various types of titanium alloy plates, strips, foils, tubes, rods, forgings, wire titanium products, variable properties, strengths and weaknesses can be used for a variety of purposes. TC1 Performance analysis: MGood Stamping. Various welding is possible, and the weldability is also good. The workability is the same as the workability of industrial pure titanium. Good oxidation resistance Working environment: Parts with a working temperature of 400 ° C or less. Suitable for all kinds of plates, stamping and welded parts Titanium stamping telescopic tube TC2 Performance analysis: At 350 ° C, the durability for 100 hours exceeds 400 MPa and shows good plasticity during hot working. It is heated to 350-400 ° C, so it does not tend to be vulnerable to welding parts that work at high temperatures. Working environment: parts, welds, forged dies and curved parts, operating temperature below 500 ° C TC4 Performance analysis: Poor stamping and good thermopla...
Post a Comment
Read more