Skip to main content

IDTech ITSX98E

IDTech ITSX98E
#ITSX98E IDTech ITSX98E New 18.1 inch Resolution 1280*1024 LCD display, ITSX98E pictures, ITSX98E price, #ITSX98E supplier
-------------------------------------------------------------------
Email: [email protected]

-------------------------------------------------------------------
Brand:IDTech
Model: ITSX98E
Diagonal Size:18.1 inch 
Type:a-Si TFT-LCD, LCM
Pixel Format:1280(LCR)×1024   [SXGA]
Configuration: LCR Vertical Stripe
Active Area:359.04(H)×287.232(V) mm
Outline Dim. :389(H)×317.2(V) mm
Bezel Area:367.0(H)×295.2(V) mm
Luminance:270 cd/m² (Typ.)
Contrast Ratio: 400:1 (Typ.) (TM)    
View Direction:Symmetry
Response Time:40 (Typ.)(Tr+Td)
Viewing Angle:85/85/85/85 (Min.)(CR≥10) Left / Right / Up / Down
Operating Mode:DD-IPS, Normally Black, Transmissive
Support Color: Grayscale   
Light Source: CCFL  [6 pcs] , With Inverter
Frame Rate:60Hz
Touch Panel:Without
Interface Type: 30 pins   LVDS (2 ch, 8-bit) , Connector
Power Supply:12.0V (Typ.)
Environment: Operating Temperature: 0 ~ 50 °C ; Storage Temperature: -20 ~ 60 °C
 

ITSX98E inverter, ITSX98E power supply, ITSX98E electronic board, ITSX98E VGA board, ITSX98E touchscreen available.

Comments

Post a Comment

Popular posts from this blog

Analysis of License Plate Recognition Technology

License plate recognition is a pattern recognition technology that uses the dynamic video or static image of the vehicle to automatically recognize the license plate number and the color of the license plate. The core of the technology includes license plate location algorithm, license plate character segmentation algorithm and optical character recognition algorithm. The working principle of license plate recognition technology Vehicle detection: Buried coil detection, infrared detection, radar detection technology, video detection and other methods can be used to sense the passing of the vehicle and trigger image capture. Image collection: Real-time and uninterrupted recording and collection of passing vehicles through the high-definition camera capture host. Preprocessing: noise filtering, automatic white balance, automatic exposure and gamma correction, edge enhancement, contrast adjustment, etc. License plate location: Scan the rows and columns on
Post a Comment
Read more

Liquid-crystal display (LCD) Over View

LCD Display  History: Liquid-crystal display (LCD) was invented in 1964 at RCA Laboratories in Princeton, NJ. In 1970, twisted-nematic (TN) mode of operation was discovered, which gave LCD the first commercial success. The LCD manufacturers supplied small-size displays to portable products such as digital watches and pocket calculators. In 1988, Sharp Corporation demonstrated a 14-in. active-matrix full-color full-motion display using a TFT (thin-film-transistor) array. Observing this, Japan launched a true LCD industry. Large-size displays were first supplied to personal computers and then to television receivers. In the second half of 1990s, the industry has moved to Korea and Taiwan. LCD display Industrial Display Systems: Industrial Display Systems provide a wide range of reliable displays from 5.7″ to 55″ including LCD displays, touch screen panels, outdoor displays and digital signage displays, and a series of industrial monitors including open frame monitors and panel mount moni
Post a Comment
Read more

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and lette
Post a Comment
Read more