Skip to main content

IDTech ITSX88E

IDTech ITSX88E
#ITSX88E IDTech ITSX88E New 18.1 inch Resolution 1280, ITSX88E pictures, ITSX88E price, #ITSX88E supplier
-------------------------------------------------------------------
Email: [email protected]

-------------------------------------------------------------------
Brand:IDTech
Model:ITSX88E
Diagonal Size:18.1 inch 
Type:a-Si TFT-LCD, LCM
Pixel Format:1280(LCR)×1024   [SXGA]
Configuration: LCR Vertical Stripe
Active Area:359.04(H)×287.232(V) mm
Outline Dim. :389(H)×317.2(V) mm
Bezel Area:367.0(H)×295.2(V) mm
Luminance:700 cd/m² (Typ.)
Contrast Ratio: 550:1 (Typ.) (TM)    
View Direction:Symmetry
Response Time:40 (Typ.)(Tr+Td)
Viewing Angle:85/85/85/85 (Min.)(CR≥10) Left / Right / Up / Down
Operating Mode:DD-IPS, Normally Black, Transmissive
Support Color: Grayscale   
Light Source: CCFL  [6 pcs] , With Inverter
Frame Rate:60Hz
Touch Panel:Without
Interface Type: 30 pins   LVDS (2 ch, 8-bit) , Connector
Power Supply:12.0V (Typ.)
Environment: Operating Temperature: 0 ~ 50 °C ; Storage Temperature: -20 ~ 60 °C
 
ITSX88E inverter, ITSX88E power supply, ITSX88E electronic board, ITSX88E VGA board, ITSX88E touchscreen available.

Comments

Post a Comment

Popular posts from this blog

IXYS DSS2X160-01A

# DSS2X160-01A IXYS DSS2X160-01A New Rectifier Diode Schottky 1 Phase 2 Element 160A 100V V(RRM) Silicon MINI BLOC SOT-227 2 PIN, DSS2X160-01A pictures, DSS2X160-01A price, #DSS2X160-01A supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/dss2x160-01a.html ------------------------------------------------------------------- Manufacturer Part Number: DSS2X160-01A Pbfree Code: Yes Part Life Cycle Code: Active Ihs Manufacturer: IXYS CORP Part Package Code: SOT-227 Package Description: R-XUFM-N2 Pin Count: 4 ECCN Code: EAR99 HTS Code: 8541.10.00.80 Manufacturer: IXYS Corporation Additional Feature: FREE WHEELING DIODE Application: GENERAL PURPOSE Case Connection: CATHODE Configuration: COMMON CATHODE, 2 ELEMENTS Diode Element Material: SILICON Diode Type: ...
Post a Comment
Read more

Semikron SKM600GA124D

# SKM600GA124D Semikron SKM600GA124D New SKM600GA124D Low Loss IGBT Module;600A/1200V/1U SKM600GA124D, SKM600GA124D pictures, SKM600GA124D price, #SKM600GA124D supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/skm600ga124d.html ------------------------------------------------------------------- SKM600GA124D Description Features • N Channel, enhancement mode • Short internal connections avoid oscillations • With built-in gate resistor chips (“R”) Rgtotal = 1,3 Ω • Without hard mould (environmental aspects) • Isolated copper baseplate using DCB Direct Copper Bonding Ceramic • All electrical connections on top for easy busbaring • Large clearance (10 mm) and creepage d...
Post a Comment
Read more

Elimination of Gear Backlash in CNC Machining Feed System

Elimination of Gear Backlash in CNC Machining Feed System   The transmission gear in the feed system of the CNC machining machine tool must eliminate the transmission gap between the meshing gears as much as possible, otherwise the motion will lag behind the command signal after each reversal of the feed system, which will affect the machining accuracy (accuracy) ). There are the following two common methods for CNC machining machine tools to eliminate the transmission gear gap.   1. Rigidity adjustment method   The rigid adjustment method is an adjustment method that cannot be automatically compensated for the tooth side clearance after adjustment. Therefore, the pitch tolerance and tooth thickness of the gear must be strictly controlled, otherwise the flexibility of the transmission will be affected. This adjustment method has a relatively simple structure and a better transmission rigidity.   (1) Eccentric shaft adjustment method   As shown in Figure 610, the...
Post a Comment
Read more