Skip to main content

Rohm 2SAR553P5T100

Rohm 2SAR553P5T100
#2SAR553P5T100 Rohm 2SAR553P5T100 New Bipolar Transistors - BJT PNP -50V Vceo -2A Ic MPT3 , 2SAR553P5T100 pictures, 2SAR553P5T100 price, #2SAR553P5T100 supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Manufacturer: ROHM Semiconductor 
Product Category: Bipolar Transistors - BJT 
RoHS:  Details  
Technology: Si 
Mounting Style: SMD/SMT 
Package / Case: SC-62-3 
Transistor Polarity: PNP 
Configuration: Single 
Collector- Emitter Voltage VCEO Max: - 50 V 
Collector- Base Voltage VCBO: - 50 V 
Emitter- Base Voltage VEBO: - 6 V 
Collector-Emitter Saturation Voltage: - 200 mV 
Maximum DC Collector Current: - 2 A 
Gain Bandwidth Product fT: 320 MHz 
Minimum Operating Temperature: - 55 C 
Maximum Operating Temperature: + 150 C 
Series: 2SxR 
DC Current Gain hFE Max: 450 at - 50 mA, - 2 V  
Packaging: Cut Tape  
Packaging: MouseReel  
Packaging: Reel  
Brand: ROHM Semiconductor  
Continuous Collector Current: - 2 A  
DC Collector/Base Gain hfe Min: 180 at - 50 mA, - 2 V  
Pd - Power Dissipation: 500 mW (1/2 W)  
Product Type: BJTs - Bipolar Transistors  
Factory Pack Quantity: 1000  
Subcategory: Transistors  
Part # Aliases: 2SAR553P5

Bipolar Transistors - BJT PNP -50V Vceo -2A Ic MPT3

Comments

Post a Comment

Popular posts from this blog

What are the characteristics of the CNC turning process?

What are the characteristics of the CNC turning process? Turning is a method of cutting the workpiece on the lathe by rotating the workpiece relative to the tool. Turning is the most basic and common cutting processing method. Most workpieces with revolving surfaces can be processed by turning methods, such as inner and outer cylindrical surfaces, inner and outer conical surfaces, end surfaces, grooves, threads, and rotary forming surfaces. Common lathes can be divided into horizontal lathes, floor lathes, vertical lathes, turret lathes and profiling lathes, and most of them are horizontal lathes.
1 comment
Read more

The Influence of CNC Turning and Milling Machining on Turning Efficiency

The cutting efficiency of CNC lathes will be affected by human factors, environmental factors and the machine tool itself. Let's talk about the influence of cutting amount and cutting tools on CNC lathe processing among many factors.   Reasonable cutting amount can improve the efficiency of CNC lathe. When the   laser  cutting  speed is increased by 10 times and the feed rate is increased by 20 times, far beyond the traditional cutting forbidden zone, the cutting mechanism has undergone a fundamental change.   The result of CNC turning  and milling combined processing is: the metal removal rate per unit power is increased by 30% to 40%, the cutting force is reduced by 30%, the cutting life of the tool is increased by 70%, and the cutting left on the workpiece is greatly reduced. Heat, cutting vibration almost disappeared; cutting processing has taken an essential leap. According to the current situation of CNC lathes, increase the feed per tooth, improve pr...
1 comment
Read more

Machining and welding process notes for TC4 titanium alloy parts

Common welding methods for titanium and titanium alloys are as follows: Argon arc welding, submerged arc welding, vacuum electron beam welding, etc. Tungsten argon arc welding is used for thicknesses of 3 mm or less, and argon arc welding is done for 3 mm or more. The purity of argon is over 99.99%, and the content of air and water vapor in argon is strictly controlled. Currently, for TC4 titanium alloys, argon arc welding, plasma arc welding are often used for welding, but both methods need to be filled with welding material. Limitations on shield gas, purity and effectiveness increase the oxygen content of the joint, reduce its strength and increase its post-weld deformation. Electron beam welding and laser beam welding are used. The following is a description of precision welding and precautions for TC4 titanium alloy. 1. Weld hole problem Table of Contents 1. Weld hole problem 2, internal quality of welded part 3. Weld depth and its variation 4, j...
Post a Comment
Read more