Skip to main content

PLANAR EL320.240.36 AG

PLANAR EL320.240.36 AG
#EL320.240.36 AG PLANAR EL320.240.36 AG New PLANAR 5.7 in-ch EL 320×240 50:1 Mono(Yellow) self Parallel Data , EL320.240.36 AG pictures, EL320.240.36 AG price, #EL320.240.36 AG supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Panel Brand : Lumineq
Panel Model : EL320.240.36 AG
Panel Type : EL , EL 
Panel Size : 5.7 inch
Resolution : 320×240 , QVGA 
Active Area : 115.1×86.3 mm
Outline : 148.1×104.7 mm
Surface : Antiglare 
Brightness : 50 cd/m² (Typ.) 
Contrast Ratio : 50 : 1 (Typ.)  
Display Colors : Mono(Yellow)   (1-bit)
Viewing Angle : 89/89/89/89 (Typ.) (L/R/U/D) 
Frequency : 120Hz  
Signal Interface : Parallel Data (1ch, 4-bit)  
Input Voltage : 5/12V (Typ.)(VL/VH) 
 

EL320.240.36 AG inverter, EL320.240.36 AG power supply, EL320.240.36 AG electronic board, EL320.240.36 AG VGA board, EL320.240.36 AG touchscreen available.

Comments

Post a Comment

Popular posts from this blog

What are the characteristics of the CNC turning process?

What are the characteristics of the CNC turning process? Turning is a method of cutting the workpiece on the lathe by rotating the workpiece relative to the tool. Turning is the most basic and common cutting processing method. Most workpieces with revolving surfaces can be processed by turning methods, such as inner and outer cylindrical surfaces, inner and outer conical surfaces, end surfaces, grooves, threads, and rotary forming surfaces. Common lathes can be divided into horizontal lathes, floor lathes, vertical lathes, turret lathes and profiling lathes, and most of them are horizontal lathes.
1 comment
Read more

The Influence of CNC Turning and Milling Machining on Turning Efficiency

The cutting efficiency of CNC lathes will be affected by human factors, environmental factors and the machine tool itself. Let's talk about the influence of cutting amount and cutting tools on CNC lathe processing among many factors.   Reasonable cutting amount can improve the efficiency of CNC lathe. When the   laser  cutting  speed is increased by 10 times and the feed rate is increased by 20 times, far beyond the traditional cutting forbidden zone, the cutting mechanism has undergone a fundamental change.   The result of CNC turning  and milling combined processing is: the metal removal rate per unit power is increased by 30% to 40%, the cutting force is reduced by 30%, the cutting life of the tool is increased by 70%, and the cutting left on the workpiece is greatly reduced. Heat, cutting vibration almost disappeared; cutting processing has taken an essential leap. According to the current situation of CNC lathes, increase the feed per tooth, improve pr...
1 comment
Read more

Machining and welding process notes for TC4 titanium alloy parts

Common welding methods for titanium and titanium alloys are as follows: Argon arc welding, submerged arc welding, vacuum electron beam welding, etc. Tungsten argon arc welding is used for thicknesses of 3 mm or less, and argon arc welding is done for 3 mm or more. The purity of argon is over 99.99%, and the content of air and water vapor in argon is strictly controlled. Currently, for TC4 titanium alloys, argon arc welding, plasma arc welding are often used for welding, but both methods need to be filled with welding material. Limitations on shield gas, purity and effectiveness increase the oxygen content of the joint, reduce its strength and increase its post-weld deformation. Electron beam welding and laser beam welding are used. The following is a description of precision welding and precautions for TC4 titanium alloy. 1. Weld hole problem Table of Contents 1. Weld hole problem 2, internal quality of welded part 3. Weld depth and its variation 4, j...
Post a Comment
Read more