Skip to main content

Mitsubishi CM450HA-5F

Mitsubishi CM450HA-5F
#CM450HA-5F Mitsubishi CM450HA-5F New 450A/250V/IGBT/1U, CM450HA-5F pictures, CM450HA-5F price, #CM450HA-5F supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------

CM450HA-5F Description

Classified as an IGBT power transistor module, CM450HA-5F weighs only 0.6 lbs. with a 450A collector current and 250V collector emitter. It is an insulated type, high power switching use transistor module. It is known for its superb features that are specially designed to help prevent or lessen forklifts common problems like an overheat engine, poor lift performance, and starter failures.

The module’s discrete super-fast recovery freewheel diode allows it to operate at full power without disrupting other electrical systems. The isolation of it’s components and interconnections from the heat sinking baseplate makes it immune from overheating issues as well.

High efficiency, reliability, and cost-effectiveness are benefits CM450HA-5F can promise to its users.

CM450HA-5F  0.60 lbs

Target_Applications

CM450HA-5F could be used in UPS, Forklift

Features

MITSUBISHI IGBT POWER TRANSISTOR MODULES HIGH POWER SWITCHING USE INSULATED TYPE
450A/250V/IGBT/1U

Comments

Post a Comment

Popular posts from this blog

Mitsubishi RM100HA-20F

# RM100HA-20F Mitsubishi RM100HA-20F New IGBT: 100A1000V, RM100HA-20F pictures, RM100HA-20F price, #RM100HA-20F supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/rm100ha-20f.html ------------------------------------------------------------------- rm100ha-20f Description rm100ha-20f is a DIODE RECTIFIER BRIDGE SINGLE.   Target Applications rm100ha-20f Free wheel use, Welders IGBT: 100A1000V
Post a Comment
Read more

Drive the preferential presetting of the spring frame of the vehicle

The secondary spring system of the original electric locomotive consists of 4 sets of the same ordinary cylindrical compression springs. Its parameters are: spring material diameter d=48mm, maximum working circle diameter D=230mm, effective working circle number n=6.6, free height H0= 528mm, working height H=431mm. The characteristic curve of the spring is approximately straight, with stable stiffness and simple structure. However, the spring stiffness is mainly along the axial direction, and its transverse shear and bending stiffness is very poor, and its anti-resonance ability is poor. After the train speeds up, its snake-like movement and shaking phenomenon intensify. Therefore, it is necessary to improve the spring system of electric locomotives. Improvement of the spring system. The improved spring parameters and characteristics take into account the special position of the secondary spring (between the bogie and the car body) and specific functions (s...
Post a Comment
Read more

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form o...
Post a Comment
Read more