Skip to main content

LG LB150X03-TL01

LG LB150X03-TL01
#LB150X03-TL01 LG LB150X03-TL01 New LG Display 15inch LCM 1024×768 400 600:1 70/70/55/65 262K/16.7M WLED LVDS, LB150X03-TL01 pictures, LB150X03-TL01 price, #LB150X03-TL01 supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Brand LG Display
Model LB150X03-TL01  
Diagonal Size 15.0 inch
Type a-Si TFT-LCD , LCM 
Pixel Format 1024(RGB)×768  [XGA]  85PPI
Configuration RGB Vertical Stripe
Active Area 304.128(H)×228.096(V) mm
Outline Dim. 326.5(H)×253.5(V) ×12.5(D) mm
Bezel Area 306.1(H)×230.0(V) mm
Treatment Antiglare
Luminance 400 cd/m² (Typ.)
Contrast Ratio 600:1 (Typ.) (TM)    
View Direction 6 o'clock
Response Time 2/6 (Typ.)(Tr/Td)
Viewing Angle 70/70/55/65 (Typ.)(CR≥10) Left / Right / Up / Down
Operating Mode TN, Normally White, Transmissive
Support Color 262K/16.7M   72% NTSC
Light Source WLED , 50K hours , With LED Driver
Weight TBD
Designed For Industrial
Frame Rate 60Hz
120Hz (60HZ Input) : Embedded MEMC Circuit
120Hz+120Hz : 120Hz Panel+120Hz Backlight
240Hz (60HZ Input) : Embedded MEMC Circuit
Touch Panel Without
Interface Type LVDS (1 ch, 6/8-bit) , 30 pins Connector
Power Supply 3.3V (Typ.) 
Environment Operating Temperature: -20 ~ 70 °C ; Storage Temperature: -30 ~ 75 °C
LB150X03-TL01 inverter, LB150X03-TL01 power supply, LB150X03-TL01 electronic board, LB150X03-TL01 VGA board, LB150X03-TL01 touchscreen available.

Comments

Post a Comment

Popular posts from this blog

IXYS DSS2X160-01A

# DSS2X160-01A IXYS DSS2X160-01A New Rectifier Diode Schottky 1 Phase 2 Element 160A 100V V(RRM) Silicon MINI BLOC SOT-227 2 PIN, DSS2X160-01A pictures, DSS2X160-01A price, #DSS2X160-01A supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/dss2x160-01a.html ------------------------------------------------------------------- Manufacturer Part Number: DSS2X160-01A Pbfree Code: Yes Part Life Cycle Code: Active Ihs Manufacturer: IXYS CORP Part Package Code: SOT-227 Package Description: R-XUFM-N2 Pin Count: 4 ECCN Code: EAR99 HTS Code: 8541.10.00.80 Manufacturer: IXYS Corporation Additional Feature: FREE WHEELING DIODE Application: GENERAL PURPOSE Case Connection: CATHODE Configuration: COMMON CATHODE, 2 ELEMENTS Diode Element Material: SILICON Diode Type: ...
Post a Comment
Read more

Advantages of five-axis machining of aluminum alloy parts

Aluminum alloy is a very good material for parts. Its low density can achieve lightweight parts and its strength is very high even comparable to steel. In addition, its corrosion resistance, electrical conductivity and thermal conductivity are very good. But there is a major defect that precision machining is very difficult, but the emergence of five-axis machining technology has solved this problem well. Today, let’s take a look at the advantages of five-axis machining of this aluminum alloy part. 1. Reduce processing time Table of Contents 1. Reduce processing time 2. Improve processing accuracy 3. High production efficiency In the processing, the flat-bottomed end mill is used to maintain the vertical surface of the complex mold processing surface, which can greatly reduce the processing time. It is also suitable for side milling with angled surfaces, which can eliminate the rib-like shape caused by the spherical end mill processing. The texture...
Post a Comment
Read more

Elimination of Gear Backlash in CNC Machining Feed System

Elimination of Gear Backlash in CNC Machining Feed System   The transmission gear in the feed system of the CNC machining machine tool must eliminate the transmission gap between the meshing gears as much as possible, otherwise the motion will lag behind the command signal after each reversal of the feed system, which will affect the machining accuracy (accuracy) ). There are the following two common methods for CNC machining machine tools to eliminate the transmission gear gap.   1. Rigidity adjustment method   The rigid adjustment method is an adjustment method that cannot be automatically compensated for the tooth side clearance after adjustment. Therefore, the pitch tolerance and tooth thickness of the gear must be strictly controlled, otherwise the flexibility of the transmission will be affected. This adjustment method has a relatively simple structure and a better transmission rigidity.   (1) Eccentric shaft adjustment method   As shown in Figure 610, the...
Post a Comment
Read more