Skip to main content

AUO M185XTN01.0

AUO M185XTN01.0
#M185XTN01.0 AUO M185XTN01.0 New AUO 18.5inch LCM 1366×768 200 700:1 45/45/20/45 16.7M WLED LVDS, M185XTN01.0 pictures, M185XTN01.0 price, #M185XTN01.0 supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Manufacturer AUO
Model Name M185XTN01.0  
Screen Size 18.5 inch
Screen Type LCM ,   a-Si TFT-LCD
Pixel Number 1366(RGB)×768   (WXGA)  84PPI
Arrangement RGB Vertical Stripe
Active Area(mm) 409.8 × 230.4 (H×V)
Outline(mm) 430.4 × 254.6 × 10.3 (H×V×D)
Bezel Area(mm) 413.4 × 234.0 (H×V)
Treatment Antiglare, Hard coating (3H)
Luminance 200 cd/m² (Typ.)
Contrast Ratio 700 : 1 (Typ.) (TM)    
Viewing Angle 45/45/20/45 (Typ.)(CR≥10) Left / Right / Up / Down
Response 3.6/1.4 (Typ.)(Tr/Td) ms
Good View at 6 o'clock
Work Mode TN, Normally White, Transmissive
Color Depth 16.7M   72% NTSC
Backlight 10S4P WLED , 30K hours , No Driver
Mass 1.29Kgs (Typ.)
Used for Desktop Monitor
Refresh Rate 60Hz 
120Hz (60HZ Input) : Embedded MEMC Circuit
120Hz+120Hz : 120Hz Panel+120Hz Backlight
240Hz (60HZ Input) : Embedded MEMC Circuit
Touchscreen Without
Signal Type LVDS (1 ch, 8-bit) , 30 pins Connector
Voltage Supply 5.0V (Typ.) 
Max. Ratings Storage Temp.: -20 ~ 60 °C    Operating Temp.: 0 ~ 50 °C   
M185XTN01.0 inverter, M185XTN01.0 power supply, M185XTN01.0 electronic board, M185XTN01.0 VGA board, M185XTN01.0 touchscreen available.

Comments

Post a Comment

Popular posts from this blog

Analysis of License Plate Recognition Technology

License plate recognition is a pattern recognition technology that uses the dynamic video or static image of the vehicle to automatically recognize the license plate number and the color of the license plate. The core of the technology includes license plate location algorithm, license plate character segmentation algorithm and optical character recognition algorithm. The working principle of license plate recognition technology Vehicle detection: Buried coil detection, infrared detection, radar detection technology, video detection and other methods can be used to sense the passing of the vehicle and trigger image capture. Image collection: Real-time and uninterrupted recording and collection of passing vehicles through the high-definition camera capture host. Preprocessing: noise filtering, automatic white balance, automatic exposure and gamma correction, edge enhancement, contrast adjustment, etc. License plate location: Scan the rows and columns on
Post a Comment
Read more

Liquid-crystal display (LCD) Over View

LCD Display  History: Liquid-crystal display (LCD) was invented in 1964 at RCA Laboratories in Princeton, NJ. In 1970, twisted-nematic (TN) mode of operation was discovered, which gave LCD the first commercial success. The LCD manufacturers supplied small-size displays to portable products such as digital watches and pocket calculators. In 1988, Sharp Corporation demonstrated a 14-in. active-matrix full-color full-motion display using a TFT (thin-film-transistor) array. Observing this, Japan launched a true LCD industry. Large-size displays were first supplied to personal computers and then to television receivers. In the second half of 1990s, the industry has moved to Korea and Taiwan. LCD display Industrial Display Systems: Industrial Display Systems provide a wide range of reliable displays from 5.7″ to 55″ including LCD displays, touch screen panels, outdoor displays and digital signage displays, and a series of industrial monitors including open frame monitors and panel mount moni
Post a Comment
Read more

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and lette
Post a Comment
Read more