Skip to main content

SAMSUNG LTM170EX-L31

SAMSUNG LTM170EX-L31
#LTM170EX-L31 SAMSUNG LTM170EX-L31 New SAMSUNG 17 inch LCD Display Panel, LTM170EX-L31 pictures, LTM170EX-L31 price, #LTM170EX-L31 supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Manufacturer: SAMSUNG
Model Name: LTM170EX-L31   
Screen Size: 17.0 inch
Screen Type" LCM ,   a-Si TFT-LCD
Pixel Number: 1280(RGB)×1024   (SXGA)
Arrangement: RGB Vertical Stripe
Active Area(mm): 337.92 × 270.336 (H×V)
Outline(mm): 354.9 × 290.3 × 13.3 (H×V×D)
Bezel Area(mm): 340.92 × 273.336 (H×V)
Treatment Antiglare: (Haze 25%), Hard coating (3H)
Luminance: 300 cd/m² (Typ.)
Contrast Ratio: 1000 : 1 (Typ.) (TM)    
Viewing Angle: 80/80/80/80 (Typ.)(CR≥10) Left / Right / Up / Down
Response: 1.3/3.7 (Typ.)(Tr/Td) ms
Work Mode: TN, Normally White, Transmissive
Color Depth: 16.7M   72% NTSC
Backlight: 4 pcs CCFL , 50K hours , No Driver
Mass: 1.70Kgs (Max.) Used for Desktop Monitor
Refresh Rate: 60Hz
Signal Type: LVDS (2 ch, 8-bit) , Connector , 30 pins
Voltage Supply: 5.0V (Typ.) 
Max. Ratings: Storage Temp.: -25 ~ 60 °C    Operating Temp.: 0 ~ 50 °C   
LTM170EX-L31 inverter, LTM170EX-L31 power supply, LTM170EX-L31 electronic board, LTM170EX-L31 VGA board, LTM170EX-L31 touchscreen available.

Comments

Post a Comment

Popular posts from this blog

What are the characteristics of the CNC turning process?

What are the characteristics of the CNC turning process? Turning is a method of cutting the workpiece on the lathe by rotating the workpiece relative to the tool. Turning is the most basic and common cutting processing method. Most workpieces with revolving surfaces can be processed by turning methods, such as inner and outer cylindrical surfaces, inner and outer conical surfaces, end surfaces, grooves, threads, and rotary forming surfaces. Common lathes can be divided into horizontal lathes, floor lathes, vertical lathes, turret lathes and profiling lathes, and most of them are horizontal lathes.
1 comment
Read more

The Influence of CNC Turning and Milling Machining on Turning Efficiency

The cutting efficiency of CNC lathes will be affected by human factors, environmental factors and the machine tool itself. Let's talk about the influence of cutting amount and cutting tools on CNC lathe processing among many factors.   Reasonable cutting amount can improve the efficiency of CNC lathe. When the   laser  cutting  speed is increased by 10 times and the feed rate is increased by 20 times, far beyond the traditional cutting forbidden zone, the cutting mechanism has undergone a fundamental change.   The result of CNC turning  and milling combined processing is: the metal removal rate per unit power is increased by 30% to 40%, the cutting force is reduced by 30%, the cutting life of the tool is increased by 70%, and the cutting left on the workpiece is greatly reduced. Heat, cutting vibration almost disappeared; cutting processing has taken an essential leap. According to the current situation of CNC lathes, increase the feed per tooth, improve pr...
1 comment
Read more

Alternate vehicles, transportation equipment and field work machine oil in all seasons adapt to changes in temperature

  Foreign oil companies adopt tracking services for key users. Whenever the oil change period is approaching and users need to buy oil, they will test the oil for free in advance, issue an inspection report, and actively provide key users with a scientific basis for oil change. This kind of thoughtful service not only shortens the distance with users, but also improves the credibility of the brand. The alternation of the four seasons requires the oil used in vehicles, transportation equipment and field work tools to adapt to changes in temperature, especially in the north. Lubricants of different viscosity grades are usually replaced at the end of autumn and spring, thus forming a peak season for lubricating oil sales. Foreign oil companies attach great importance to the promotional activities in these two seasons. In the autumn, they launched low pour point, low viscosity grades of multi-grade antifreeze and antifreeze, and accompanied the promotion a...
Post a Comment
Read more