Skip to main content

PVI PD080SL1

PVI PD080SL1
#PD080SL1 PVI PD080SL1 New PVI a-Si TFT-LCD Panel 8.0 inch 800(RGB)×600 SVGA , PD080SL1 pictures, PD080SL1 price, #PD080SL1 supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Panel Brand : PVI
Panel Model : PD080SL1
Panel Type : a-Si TFT-LCD , Panel 
Panel Size : 8.0 inch
Resolution : 800(RGB)×600 , SVGA 
Display Mode : TN, Normally White, Transmissive 
Active Area : 162×121.5 mm
Outline : 200×152×9 mm
Surface : Antiglare 
Brightness : 420 cd/m² (Typ.) 
Contrast Ratio : 400:1 (Typ.)  
Display Colors : 262K/16.7M   (6-bit / 6-bit + Hi-FRC)
Response Time : 15/25 (Typ.)(Tr/Td) 
Viewing Angle : 60/60/35/50 (Typ.)(CR≥10) (L/R/U/D) 
Frequency : 60Hz  
Lamp Type : 2 pcs CCFL   
Signal Interface : LVDS (1 ch, 6/8-bit)  
Input Voltage : 3.3V (Typ.) 
 

PD080SL1 inverter, PD080SL1 power supply, PD080SL1 electronic board, PD080SL1 VGA board, PD080SL1 touchscreen available.

Comments

Post a Comment

Popular posts from this blog

IXYS DSS2X160-01A

# DSS2X160-01A IXYS DSS2X160-01A New Rectifier Diode Schottky 1 Phase 2 Element 160A 100V V(RRM) Silicon MINI BLOC SOT-227 2 PIN, DSS2X160-01A pictures, DSS2X160-01A price, #DSS2X160-01A supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/dss2x160-01a.html ------------------------------------------------------------------- Manufacturer Part Number: DSS2X160-01A Pbfree Code: Yes Part Life Cycle Code: Active Ihs Manufacturer: IXYS CORP Part Package Code: SOT-227 Package Description: R-XUFM-N2 Pin Count: 4 ECCN Code: EAR99 HTS Code: 8541.10.00.80 Manufacturer: IXYS Corporation Additional Feature: FREE WHEELING DIODE Application: GENERAL PURPOSE Case Connection: CATHODE Configuration: COMMON CATHODE, 2 ELEMENTS Diode Element Material: SILICON Diode Type: ...
Post a Comment
Read more

Semikron SKM600GA124D

# SKM600GA124D Semikron SKM600GA124D New SKM600GA124D Low Loss IGBT Module;600A/1200V/1U SKM600GA124D, SKM600GA124D pictures, SKM600GA124D price, #SKM600GA124D supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/skm600ga124d.html ------------------------------------------------------------------- SKM600GA124D Description Features • N Channel, enhancement mode • Short internal connections avoid oscillations • With built-in gate resistor chips (“R”) Rgtotal = 1,3 Ω • Without hard mould (environmental aspects) • Isolated copper baseplate using DCB Direct Copper Bonding Ceramic • All electrical connections on top for easy busbaring • Large clearance (10 mm) and creepage d...
Post a Comment
Read more

Elimination of Gear Backlash in CNC Machining Feed System

Elimination of Gear Backlash in CNC Machining Feed System   The transmission gear in the feed system of the CNC machining machine tool must eliminate the transmission gap between the meshing gears as much as possible, otherwise the motion will lag behind the command signal after each reversal of the feed system, which will affect the machining accuracy (accuracy) ). There are the following two common methods for CNC machining machine tools to eliminate the transmission gear gap.   1. Rigidity adjustment method   The rigid adjustment method is an adjustment method that cannot be automatically compensated for the tooth side clearance after adjustment. Therefore, the pitch tolerance and tooth thickness of the gear must be strictly controlled, otherwise the flexibility of the transmission will be affected. This adjustment method has a relatively simple structure and a better transmission rigidity.   (1) Eccentric shaft adjustment method   As shown in Figure 610, the...
Post a Comment
Read more