Skip to main content

Mitsubishi AA090MF01

Mitsubishi AA090MF01
#AA090MF01 Mitsubishi AA090MF01 New Mitsubishi 9 inch LCM 800×480 800 800:1 80/80/80/60 262K/16.7M WLED LVDS, AA090MF01 pictures, AA090MF01 price, #AA090MF01 supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Panel Brand Mitsubishi
Panel Size 9.0"
Resolution 800(RGB)×480, WVGA, 103PPI 
Display Area 196.8(W)×118.08(H) mm
Outline Size 219(W)×136.2(H) ×10(D) mm
Brightness 800 cd/m² (Typ.)
Viewing Angle 80/80/80/60 (Typ.)(CR≥10) 
Best View on 6 o'clock
Display Colors 262K/16.7M   40% NTSC
Frequency 60Hz  
Weight 340g (Typ.)
Panel Model AA090MF01  
Panel Type a-Si TFT-LCD , LCM 
Pixel Format RGB Vertical Stripe
Bezel Opening 199.4(W)×120.7(H) mm
Surface Antiglare, Hard coating (3H)
Contrast Ratio 800:1 (Typ.) (TM)    
Display Mode TN, Normally White, Transmissive 
Response Time 4/12 (Typ.)(Tr/Td)
Lamp Type 7S2P WLED , 100K hours , Without Driver
Touch Screen Without
Signal Interface LVDS (1 ch, 6/8-bit) , 20 pins Connector
Input Voltage 3.3V (Typ.) 
Environment Operating Temp.: -30 ~ 80 °C ; Storage Temp.: -30 ~ 80 °C
 
AA090MF01 inverter, AA090MF01 power supply, AA090MF01 electronic board, AA090MF01 VGA board, AA090MF01 touchscreen available.

Comments

Post a Comment

Popular posts from this blog

Drive the preferential presetting of the spring frame of the vehicle

The secondary spring system of the original electric locomotive consists of 4 sets of the same ordinary cylindrical compression springs. Its parameters are: spring material diameter d=48mm, maximum working circle diameter D=230mm, effective working circle number n=6.6, free height H0= 528mm, working height H=431mm. The characteristic curve of the spring is approximately straight, with stable stiffness and simple structure. However, the spring stiffness is mainly along the axial direction, and its transverse shear and bending stiffness is very poor, and its anti-resonance ability is poor. After the train speeds up, its snake-like movement and shaking phenomenon intensify. Therefore, it is necessary to improve the spring system of electric locomotives. Improvement of the spring system. The improved spring parameters and characteristics take into account the special position of the secondary spring (between the bogie and the car body) and specific functions (s...
Post a Comment
Read more

Mitsubishi RM100HA-20F

# RM100HA-20F Mitsubishi RM100HA-20F New IGBT: 100A1000V, RM100HA-20F pictures, RM100HA-20F price, #RM100HA-20F supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/rm100ha-20f.html ------------------------------------------------------------------- rm100ha-20f Description rm100ha-20f is a DIODE RECTIFIER BRIDGE SINGLE.   Target Applications rm100ha-20f Free wheel use, Welders IGBT: 100A1000V
Post a Comment
Read more

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form o...
Post a Comment
Read more