Skip to main content

CPT CLAA170EA07

CPT CLAA170EA07
#CLAA170EA07 CPT CLAA170EA07 New CPT 17inch LCM 1280×1024 300 500:1 70/70/67/63 16.2M CCFL LVDS, CLAA170EA07 pictures, CLAA170EA07 price, #CLAA170EA07 supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Manufacturer CPT
Model Name CLAA170EA07    2 Compatible
Screen Size 17.0 inch
Screen Type LCM ,   a-Si TFT-LCD
Pixel Number 1280(RGB)×1024   (SXGA)  96PPI
Arrangement RGB Vertical Stripe
Active Area(mm) 337.92 × 270.336 (H×V)
Outline(mm) 358.5 × 296.5 × 17.5 (H×V×D)
Bezel Area(mm) 341.6 × 274.0 (H×V)
Treatment Antiglare
Luminance 300 (Typ.)(cd/m²)
Contrast Ratio 500 : 1 (Typ.) (TM)    
Viewing Angle 70/70/67/63 (Typ.)(CR≥10)
Work Mode TN, Normally White, Transmissive 
Good View at 6 o'clock
Response 5/7 (Typ.)(Tr/Td) ms
Color Depth 16.2M   72% NTSC
Backlight 4 pcs CCFL , 40K hours , No Driver
Mass 2.00Kgs (Typ.)
Used for Desktop Monitor
Refresh Rate 60Hz 
Touchscreen Without
Signal Type LVDS (2 ch, 8-bit) , 30 pins Connector
Voltage Supply 5.0V (Typ.) 
Max. Ratings Storage Temp.: -20 ~ 60 °C    Operating Temp.: 0 ~ 50 °C
 
CLAA170EA07 inverter, CLAA170EA07 power supply, CLAA170EA07 electronic board, CLAA170EA07 VGA board, CLAA170EA07 touchscreen available.

Comments

Post a Comment

Popular posts from this blog

What are the characteristics of the CNC turning process?

What are the characteristics of the CNC turning process? Turning is a method of cutting the workpiece on the lathe by rotating the workpiece relative to the tool. Turning is the most basic and common cutting processing method. Most workpieces with revolving surfaces can be processed by turning methods, such as inner and outer cylindrical surfaces, inner and outer conical surfaces, end surfaces, grooves, threads, and rotary forming surfaces. Common lathes can be divided into horizontal lathes, floor lathes, vertical lathes, turret lathes and profiling lathes, and most of them are horizontal lathes.
1 comment
Read more

The Influence of CNC Turning and Milling Machining on Turning Efficiency

The cutting efficiency of CNC lathes will be affected by human factors, environmental factors and the machine tool itself. Let's talk about the influence of cutting amount and cutting tools on CNC lathe processing among many factors.   Reasonable cutting amount can improve the efficiency of CNC lathe. When the   laser  cutting  speed is increased by 10 times and the feed rate is increased by 20 times, far beyond the traditional cutting forbidden zone, the cutting mechanism has undergone a fundamental change.   The result of CNC turning  and milling combined processing is: the metal removal rate per unit power is increased by 30% to 40%, the cutting force is reduced by 30%, the cutting life of the tool is increased by 70%, and the cutting left on the workpiece is greatly reduced. Heat, cutting vibration almost disappeared; cutting processing has taken an essential leap. According to the current situation of CNC lathes, increase the feed per tooth, improve pr...
1 comment
Read more

Alternate vehicles, transportation equipment and field work machine oil in all seasons adapt to changes in temperature

  Foreign oil companies adopt tracking services for key users. Whenever the oil change period is approaching and users need to buy oil, they will test the oil for free in advance, issue an inspection report, and actively provide key users with a scientific basis for oil change. This kind of thoughtful service not only shortens the distance with users, but also improves the credibility of the brand. The alternation of the four seasons requires the oil used in vehicles, transportation equipment and field work tools to adapt to changes in temperature, especially in the north. Lubricants of different viscosity grades are usually replaced at the end of autumn and spring, thus forming a peak season for lubricating oil sales. Foreign oil companies attach great importance to the promotional activities in these two seasons. In the autumn, they launched low pour point, low viscosity grades of multi-grade antifreeze and antifreeze, and accompanied the promotion a...
Post a Comment
Read more