Skip to main content

CPT CLAA090LB01CW

CPT CLAA090LB01CW
#CLAA090LB01CW CPT CLAA090LB01CW New CPT 9inch LCM 800×480 300 400:1 70/70/50/70 262K CCFL TTL, CLAA090LB01CW pictures, CLAA090LB01CW price, #CLAA090LB01CW supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Manufacturer CPT
Model Name CLAA090LB01CW  
Screen Size 9.0 inch
Screen Type LCM ,   a-Si TFT-LCD
Pixel Number 800(RGB)×480   (WVGA)  104PPI
Arrangement RGB Vertical Stripe
Active Area(mm) 198 × 112.08 (H×V)
Outline(mm) 210.7 × 126.4 (H×V×D)
Bezel Area(mm) 201.1 × 115.15 (H×V)
Treatment Antiglare, Hard coating (3H)
Luminance 300 cd/m² (Typ.)
Contrast Ratio 400 : 1 (Typ.) (TM)    
Viewing Angle 70/70/50/70 (Typ.)(CR≥10) Left / Right / Up / Down
Response 25 (Typ.)(Tr+Td) ms
Good View at 6 o'clock
Work Mode TN, Normally White, Transmissive 
Color Depth 262K   45% NTSC
Backlight 1 pcs CCFL , 15K hours , No Driver
Mass 285g (Typ.)
Used for Automotive Display Digital Photo Frame Portable DVD Player
Refresh Rate 60Hz
Touchscreen Without
Signal Type TTL (1 ch, 6-bit) , 40 pins Connector
Voltage Supply 3.3V (Typ.)
Max. Ratings Storage Temp.: -40 ~ 95 °C    Operating Temp.: -30 ~ 85 °C    ; Vibration Level: 2.9G (28.4 m/s²)
CLAA090LB01CW inverter, CLAA090LB01CW power supply, CLAA090LB01CW electronic board, CLAA090LB01CW VGA board, CLAA090LB01CW touchscreen available.

Comments

Post a Comment

Popular posts from this blog

Drive the preferential presetting of the spring frame of the vehicle

The secondary spring system of the original electric locomotive consists of 4 sets of the same ordinary cylindrical compression springs. Its parameters are: spring material diameter d=48mm, maximum working circle diameter D=230mm, effective working circle number n=6.6, free height H0= 528mm, working height H=431mm. The characteristic curve of the spring is approximately straight, with stable stiffness and simple structure. However, the spring stiffness is mainly along the axial direction, and its transverse shear and bending stiffness is very poor, and its anti-resonance ability is poor. After the train speeds up, its snake-like movement and shaking phenomenon intensify. Therefore, it is necessary to improve the spring system of electric locomotives. Improvement of the spring system. The improved spring parameters and characteristics take into account the special position of the secondary spring (between the bogie and the car body) and specific functions (s...
Post a Comment
Read more

Mitsubishi RM100HA-20F

# RM100HA-20F Mitsubishi RM100HA-20F New IGBT: 100A1000V, RM100HA-20F pictures, RM100HA-20F price, #RM100HA-20F supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/rm100ha-20f.html ------------------------------------------------------------------- rm100ha-20f Description rm100ha-20f is a DIODE RECTIFIER BRIDGE SINGLE.   Target Applications rm100ha-20f Free wheel use, Welders IGBT: 100A1000V
Post a Comment
Read more

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form o...
Post a Comment
Read more