Skip to main content

AUO G185XW01 V0

AUO G185XW01 V0
#G185XW01 V0 AUO G185XW01 V0 New AUO 18.5 inch LCM 1366×768 300 1000:1 85/85/80/80 16.7M CCFL LVDS, G185XW01 V0 pictures, G185XW01 V0 price, #G185XW01 V0 supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Panel Brand AUO
Panel Size 18.5"
Panel Model G185XW01 V0 
Resolution 1366(RGB)×768, WXGA, 84PPI 
Display Area 409.8(W)×230.4(H) mm
Outline Size 430.4(W)×254.6(H) ×12(D) mm
Brightness 300 cd/m² (Typ.)
Viewing Angle 85/85/80/80 (Typ.)(CR≥10) 
Best View on -
Display Colors 16.7M   72% NTSC
Frequency 60Hz  
Weight 1.65Kgs (Max.)
Panel Type a-Si TFT-LCD , LCM 
Pixel Format RGB Vertical Stripe
Bezel Opening 413.4(W)×234.0(H) mm
Surface Antiglare, Hard coating (3H)
Contrast Ratio 1000:1 (Typ.) (TM)    
Display Mode TN, Normally White, Transmissive 
Response Time 3.6/1.4 (Typ.)(Tr/Td)
Lamp Type 2 pcs CCFL , 50K hours , Without Driver
Touch Screen Without
Signal Interface LVDS (1 ch, 8-bit) , 30 pins Connector
Input Voltage 5.0V (Typ.) 
Environment Operating Temp.: 0 ~ 50 °C ; Storage Temp.: -20 ~ 60 °C
 
G185XW01 V0 inverter, G185XW01 V0 power supply, G185XW01 V0 electronic board, G185XW01 V0 VGA board, G185XW01 V0 touchscreen available.

Comments

Post a Comment

Popular posts from this blog

Analysis of License Plate Recognition Technology

License plate recognition is a pattern recognition technology that uses the dynamic video or static image of the vehicle to automatically recognize the license plate number and the color of the license plate. The core of the technology includes license plate location algorithm, license plate character segmentation algorithm and optical character recognition algorithm. The working principle of license plate recognition technology Vehicle detection: Buried coil detection, infrared detection, radar detection technology, video detection and other methods can be used to sense the passing of the vehicle and trigger image capture. Image collection: Real-time and uninterrupted recording and collection of passing vehicles through the high-definition camera capture host. Preprocessing: noise filtering, automatic white balance, automatic exposure and gamma correction, edge enhancement, contrast adjustment, etc. License plate location: Scan the rows and columns on
Post a Comment
Read more

Liquid-crystal display (LCD) Over View

LCD Display  History: Liquid-crystal display (LCD) was invented in 1964 at RCA Laboratories in Princeton, NJ. In 1970, twisted-nematic (TN) mode of operation was discovered, which gave LCD the first commercial success. The LCD manufacturers supplied small-size displays to portable products such as digital watches and pocket calculators. In 1988, Sharp Corporation demonstrated a 14-in. active-matrix full-color full-motion display using a TFT (thin-film-transistor) array. Observing this, Japan launched a true LCD industry. Large-size displays were first supplied to personal computers and then to television receivers. In the second half of 1990s, the industry has moved to Korea and Taiwan. LCD display Industrial Display Systems: Industrial Display Systems provide a wide range of reliable displays from 5.7″ to 55″ including LCD displays, touch screen panels, outdoor displays and digital signage displays, and a series of industrial monitors including open frame monitors and panel mount moni
Post a Comment
Read more

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and lette
Post a Comment
Read more