Skip to main content

AUO G090VTN02.0

AUO G090VTN02.0
#G090VTN02.0 AUO G090VTN02.0 New AUO 9inch LCM 800×480 300 500:1 70/70/50/70 16.7M WLED TTL, G090VTN02.0 pictures, G090VTN02.0 price, #G090VTN02.0 supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Brand AUO
Model G090VTN02.0  
Diagonal Size 9.0 inch
Type a-Si TFT-LCD, LCM
Pixel Format 800(RGB)×480  [WVGA]  104PPI
Configuration RGB Vertical Stripe
Active Area 198(H)×111.696(V) mm
Outline Dim 211.1(H)×128.4(V) ×7.1(D) mm
Bezel Area 201.0(H)×114.7(V) mm
Treatment Antiglare, Hard coating (3H)
Luminance 300 cd/m² (Typ.)
Contrast Ratio 500:1 (Typ.) (TM)    
View Direction 6 o'clock
Response Time 10/15 (Typ.)(Tr/Td)
Viewing Angle 70/70/50/70 (Typ.)(CR≥10) Left / Right / Up / Down
Operating Mode TN, Normally White, Transmissive
Support Color 16.7M   50% NTSC
Light Source WLED , 20K hours , With LED Driver
Weight 255g (Typ.)
Designed For Industrial
Frame Rate 60Hz
120Hz (60HZ Input) : Embedded MEMC Circuit
120Hz+120Hz : 120Hz Panel+120Hz Backlight
240Hz (60HZ Input) : Embedded MEMC
CircuitTouch Panel Without
Interface Type TTL (1 ch, 8-bit) , 50 pins Connector
Power Supply 3.3V (Typ.) 
Environment Operating Temperature: -20 ~ 75 °C ; Storage Temperature: -30 ~ 80 °C
G090VTN02.0 inverter, G090VTN02.0 power supply, G090VTN02.0 electronic board, G090VTN02.0 VGA board, G090VTN02.0 touchscreen available.

Comments

Post a Comment

Popular posts from this blog

Drive the preferential presetting of the spring frame of the vehicle

The secondary spring system of the original electric locomotive consists of 4 sets of the same ordinary cylindrical compression springs. Its parameters are: spring material diameter d=48mm, maximum working circle diameter D=230mm, effective working circle number n=6.6, free height H0= 528mm, working height H=431mm. The characteristic curve of the spring is approximately straight, with stable stiffness and simple structure. However, the spring stiffness is mainly along the axial direction, and its transverse shear and bending stiffness is very poor, and its anti-resonance ability is poor. After the train speeds up, its snake-like movement and shaking phenomenon intensify. Therefore, it is necessary to improve the spring system of electric locomotives. Improvement of the spring system. The improved spring parameters and characteristics take into account the special position of the secondary spring (between the bogie and the car body) and specific functions (s...
Post a Comment
Read more

Mitsubishi RM100HA-20F

# RM100HA-20F Mitsubishi RM100HA-20F New IGBT: 100A1000V, RM100HA-20F pictures, RM100HA-20F price, #RM100HA-20F supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/rm100ha-20f.html ------------------------------------------------------------------- rm100ha-20f Description rm100ha-20f is a DIODE RECTIFIER BRIDGE SINGLE.   Target Applications rm100ha-20f Free wheel use, Welders IGBT: 100A1000V
Post a Comment
Read more

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form o...
Post a Comment
Read more