Skip to main content

AUO A056DN01 V1

AUO A056DN01 V1
#A056DN01 V1 AUO A056DN01 V1 New AUO 5.6 inch LCM 320×234 300 150:1 45/45/10/30 CCFL Analog, A056DN01 V1 pictures, A056DN01 V1 price, #A056DN01 V1 supplier
-------------------------------------------------------------------
Email: sales@shunlongwei.com

-------------------------------------------------------------------
Brand AU Optronics
Diagonal Size 5.6 inch
Pixel Format 320(RGB)×234  71PPI
Active Area 113.28(H)×84.708(V) mm
Bezel Area 116.08(H)×87.51(V) mm
Luminance 300 cd/m² (Typ.)
View Direction 6 o'clock
Viewing Angle 45/45/10/30 (Min.)(CR≥10) 
Weight 145±10g
Type a-Si TFT-LCD , LCM 
Configuration RGB Vertical Stripe
Outline Dim. 126.5(H)×100(V) mm
Contrast Ratio 150:1 (Typ.) (TM)    
Response Time 15/20 (Typ.)(Tr/Td)
Operating Mode TN, Normally White, Transmissive 
Light Source CCFL  [1 pcs] , 10K hours , W/O Driver
Designed For   Digital Photo Frame Portable DVD Player Video Door Phone
Touch Panel Without
A056DN01 V1 inverter, A056DN01 V1 power supply, A056DN01 V1 electronic board, A056DN01 V1 VGA board, A056DN01 V1 touchscreen available.

Comments

Post a Comment

Popular posts from this blog

Analysis of License Plate Recognition Technology

License plate recognition is a pattern recognition technology that uses the dynamic video or static image of the vehicle to automatically recognize the license plate number and the color of the license plate. The core of the technology includes license plate location algorithm, license plate character segmentation algorithm and optical character recognition algorithm. The working principle of license plate recognition technology Vehicle detection: Buried coil detection, infrared detection, radar detection technology, video detection and other methods can be used to sense the passing of the vehicle and trigger image capture. Image collection: Real-time and uninterrupted recording and collection of passing vehicles through the high-definition camera capture host. Preprocessing: noise filtering, automatic white balance, automatic exposure and gamma correction, edge enhancement, contrast adjustment, etc. License plate location: Scan the rows and columns on
Post a Comment
Read more

Liquid-crystal display (LCD) Over View

LCD Display  History: Liquid-crystal display (LCD) was invented in 1964 at RCA Laboratories in Princeton, NJ. In 1970, twisted-nematic (TN) mode of operation was discovered, which gave LCD the first commercial success. The LCD manufacturers supplied small-size displays to portable products such as digital watches and pocket calculators. In 1988, Sharp Corporation demonstrated a 14-in. active-matrix full-color full-motion display using a TFT (thin-film-transistor) array. Observing this, Japan launched a true LCD industry. Large-size displays were first supplied to personal computers and then to television receivers. In the second half of 1990s, the industry has moved to Korea and Taiwan. LCD display Industrial Display Systems: Industrial Display Systems provide a wide range of reliable displays from 5.7″ to 55″ including LCD displays, touch screen panels, outdoor displays and digital signage displays, and a series of industrial monitors including open frame monitors and panel mount moni
Post a Comment
Read more

Hydrostatic guideway of CNC machining lathe

The static pressure slide rail (TTW guide) of the CNC machining lathe transfers the oil with a certain pressure through the throttle to the oil cavity between the sliding surfaces of the slide rail (TTW guide) to form a pressure oil film to float the moving parts , Make the sliding rail (TTW guide) surface in a pure liquid friction state.   CNC machining General CNC machining usually refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining c17200   beryllium   copper   and milling machine, etc. The feed route of finishing is basically carried out along the part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. In the numerical control processing, the control system issues instructions to make the tool perform various motions that meet the requirements, and the shape and size of the workpiece are expressed in the form of numbers and lette
Post a Comment
Read more