Skip to main content

AUO G101EAN02.0

AUO G101EAN02.0 In Store AUO G101EAN02.0 In Store

#G101EAN02.0 auo G101EAN02.0 New AUO 10.1″ LCM 1280×800 400 800:1 89/89/89/89 16.7M WLED LVDS, G101EAN02.0 pictures, G101EAN02.0 price, #G101EAN02.0 supplier
——————————————————————-
Email: sales@shunlongwei.com

——————————————————————-

Panel Brand AUO
Panel Model G101EAN02.0
Panel Size 10.1"
Panel Type a-Si TFT-LCD , LCM 
Resolution 1280(RGB)×800, WXGA, 149PPI
Pixel Format RGB Vertical Stripe
Display Area 216.96(W)×135.6(H) mm
Outline Size 227.72(W)×147.8(H) ×4.8(D) mm
Surface Hard coating
Brightness 400 cd/m² (Typ.)
Contrast Ratio 800:1 (Typ.) (TM)    
Viewing Angle 89/89/89/89 (Typ.)(CR≥10)
Display Mode AHVA, Normally Black, Transmissive 
Best View on Symmetry
Response Time 29 (Typ.)(Tr+Td)
Display Colors 16.7M   50% NTSC
Lamp Type WLED , 30K hours , With LED Driver
Frequency 60Hz 
Touch Screen Without
Signal Interface LVDS (1 ch, 8-bit) , 40 pins Connector
Input Voltage 3.3V (Typ.)
Environment Operating Temp.: -20 ~ 60 °C ; Storage Temp.: -20 ~ 60 °C
 

Comments

Post a Comment

Popular posts from this blog

Drive the preferential presetting of the spring frame of the vehicle

The secondary spring system of the original electric locomotive consists of 4 sets of the same ordinary cylindrical compression springs. Its parameters are: spring material diameter d=48mm, maximum working circle diameter D=230mm, effective working circle number n=6.6, free height H0= 528mm, working height H=431mm. The characteristic curve of the spring is approximately straight, with stable stiffness and simple structure. However, the spring stiffness is mainly along the axial direction, and its transverse shear and bending stiffness is very poor, and its anti-resonance ability is poor. After the train speeds up, its snake-like movement and shaking phenomenon intensify. Therefore, it is necessary to improve the spring system of electric locomotives. Improvement of the spring system. The improved spring parameters and characteristics take into account the special position of the secondary spring (between the bogie and the car body) and specific functions (s...
Post a Comment
Read more

Mitsubishi RM100HA-20F

# RM100HA-20F Mitsubishi RM100HA-20F New IGBT: 100A1000V, RM100HA-20F pictures, RM100HA-20F price, #RM100HA-20F supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/rm100ha-20f.html ------------------------------------------------------------------- rm100ha-20f Description rm100ha-20f is a DIODE RECTIFIER BRIDGE SINGLE.   Target Applications rm100ha-20f Free wheel use, Welders IGBT: 100A1000V
Post a Comment
Read more

Elimination of Gear Backlash in CNC Machining Feed System

Elimination of Gear Backlash in CNC Machining Feed System   The transmission gear in the feed system of the CNC machining machine tool must eliminate the transmission gap between the meshing gears as much as possible, otherwise the motion will lag behind the command signal after each reversal of the feed system, which will affect the machining accuracy (accuracy) ). There are the following two common methods for CNC machining machine tools to eliminate the transmission gear gap.   1. Rigidity adjustment method   The rigid adjustment method is an adjustment method that cannot be automatically compensated for the tooth side clearance after adjustment. Therefore, the pitch tolerance and tooth thickness of the gear must be strictly controlled, otherwise the flexibility of the transmission will be affected. This adjustment method has a relatively simple structure and a better transmission rigidity.   (1) Eccentric shaft adjustment method   As shown in Figure 610, the...
Post a Comment
Read more