Skip to main content

What is the principle of a power transmitter?

The power transmitter is a combination of multiple precision parts and requires careful use and maintenance. Before using a power transmitter, you need to know its principle.

What is the principle of a power transmitter? Introduction to the principle and characteristics of power transmitters

Principle of power transmitter

transmitter
transmitter

The power transmitter is mainly composed of three-phase isolated sampling circuit, A/D converter, single chip microcomputer, DSP device, D/A converter, calibration amplifier and special thick film integrated V/I converter.

After the three-phase AC input signal passes through the three-phase isolation sampling circuit, the common ground tracking voltage signal of the three-phase current and the three-phase voltage signal is formed. Under the control of the single-chip microcomputer, the A/D converter performs multi-point synchronous sampling on it, and the sample is obtained The data is calculated by the DSP device according to the principle of electrical engineering to calculate the three-phase active power (digital quantity) of the measured signal, and then the digital signal representing the three-phase power is converted into an analog quantity by the D/A converter, which is amplified and calibrated by the calibration amplifier Then, a direct current voltage output VZ is formed; the VZ output is passed through a dedicated thick film integrated V/I converter to form a 0-20mA or 4-20mA direct current output IZ.

Performance characteristics of power transmitter

As a professional instrument salesperson, you must be familiar with the characteristics of power transmitters and be more professional when communicating with customers.

The three ports of analog output, input, output, and power supply are isolated from each other.

Good linearity and high precision.

Automatic zero calibration and excellent temperature characteristics ensure the long-term stability of the instrument and avoid the need for periodic calibration of the transmitter.

All parameters are digitally calibrated. The analog adjustment of the conventional potentiometer is abandoned, the hardware circuit is simplified, and the reliability and stability of the whole machine are improved.

Perfect electromagnetic compatibility design, with strong anti-electromagnetic interference ability.

Full use of SMT devices, so that the product has the advantages of small size, low power consumption, and light weight.

Digital output

The input is isolated from the power supply and the output. For power transmitters using optical fiber transmission, the optical fiber not only plays a transmission role, but also plays a role in isolation. It can completely avoid the loss and interference of the transmission link, and is suitable for high-precision measurement in various complex electromagnetic environments;

The digital output transmitter is convenient for networked and intelligent applications.

The digital output power transmitter can form a virtual instrument together with the transmission system and the host computer. The function and display mode of the virtual instrument are determined by the software, which can realize multi-parameter values, meters, real-time waveforms, trend curves, and bar graphs. , Pie chart, vector diagram and so on.

Comments

Popular posts from this blog

What are the characteristics of the CNC turning process?

What are the characteristics of the CNC turning process? Turning is a method of cutting the workpiece on the lathe by rotating the workpiece relative to the tool. Turning is the most basic and common cutting processing method. Most workpieces with revolving surfaces can be processed by turning methods, such as inner and outer cylindrical surfaces, inner and outer conical surfaces, end surfaces, grooves, threads, and rotary forming surfaces. Common lathes can be divided into horizontal lathes, floor lathes, vertical lathes, turret lathes and profiling lathes, and most of them are horizontal lathes.

The Influence of CNC Turning and Milling Machining on Turning Efficiency

The cutting efficiency of CNC lathes will be affected by human factors, environmental factors and the machine tool itself. Let's talk about the influence of cutting amount and cutting tools on CNC lathe processing among many factors.   Reasonable cutting amount can improve the efficiency of CNC lathe. When the   laser  cutting  speed is increased by 10 times and the feed rate is increased by 20 times, far beyond the traditional cutting forbidden zone, the cutting mechanism has undergone a fundamental change.   The result of CNC turning  and milling combined processing is: the metal removal rate per unit power is increased by 30% to 40%, the cutting force is reduced by 30%, the cutting life of the tool is increased by 70%, and the cutting left on the workpiece is greatly reduced. Heat, cutting vibration almost disappeared; cutting processing has taken an essential leap. According to the current situation of CNC lathes, increase the feed per tooth, improve pr...

Machining and welding process notes for TC4 titanium alloy parts

Common welding methods for titanium and titanium alloys are as follows: Argon arc welding, submerged arc welding, vacuum electron beam welding, etc. Tungsten argon arc welding is used for thicknesses of 3 mm or less, and argon arc welding is done for 3 mm or more. The purity of argon is over 99.99%, and the content of air and water vapor in argon is strictly controlled. Currently, for TC4 titanium alloys, argon arc welding, plasma arc welding are often used for welding, but both methods need to be filled with welding material. Limitations on shield gas, purity and effectiveness increase the oxygen content of the joint, reduce its strength and increase its post-weld deformation. Electron beam welding and laser beam welding are used. The following is a description of precision welding and precautions for TC4 titanium alloy. 1. Weld hole problem Table of Contents 1. Weld hole problem 2, internal quality of welded part 3. Weld depth and its variation 4, j...