Skip to main content

What details should be paid attention to in the processing of CNC lathe parts ​

In fact, what a workpiece can see is not only the strength of a manufacturer, but also its handling of some details.

For CNC lathe parts, if the cnc manufacturer does not handle it well, then this machining part is not acceptable.



What should the manufacturer pay attention to when cnc machining?

  • 1. The burr on the cost surface can be said to be easily overlooked by many manufacturers. Many people say what this part looks like when it comes out, and what it looks like when the finished product is packaged. In fact, for a part, the CNC lathe 5 axis cnc machining parts are completed by equipment, then the cloak will be produced during injection molding, and this burr is also produced at this time. If it is not trimmed in time, or the The parts are obsolete. Otherwise, it will affect other links during use.
  • 2. Accuracy of parts. For CNC lathe machining parts, its accuracy is very strict. It can only be used if it meets the required accuracy. The accuracy of the part is judged mainly by its control of the size. Ability, if it is within the tolerance that can fluctuate, then the part is qualified, if it is out of tolerance, then it is unqualified.
  • 3. Analysis of the test results. For china mfg component, it will inevitably undergo a performance test before it leaves the factory. If the performance is qualified, it will be shipped out. If it is not qualified, then it should be analyzed. In this way, it can also avoid mass scrapping. Manufacturers in the machining industry will basically deal with it in this way. They will make certain quality control charts based on the performance of many companies to analyze the reasons.
    ​

Comments

Post a Comment

Popular posts from this blog

Elimination of Gear Backlash in CNC Machining Feed System

Elimination of Gear Backlash in CNC Machining Feed System   The transmission gear in the feed system of the CNC machining machine tool must eliminate the transmission gap between the meshing gears as much as possible, otherwise the motion will lag behind the command signal after each reversal of the feed system, which will affect the machining accuracy (accuracy) ). There are the following two common methods for CNC machining machine tools to eliminate the transmission gear gap.   1. Rigidity adjustment method   The rigid adjustment method is an adjustment method that cannot be automatically compensated for the tooth side clearance after adjustment. Therefore, the pitch tolerance and tooth thickness of the gear must be strictly controlled, otherwise the flexibility of the transmission will be affected. This adjustment method has a relatively simple structure and a better transmission rigidity.   (1) Eccentric shaft adjustment method   As shown in Figure 610, the...
Post a Comment
Read more

Semikron SKM600GA124D

# SKM600GA124D Semikron SKM600GA124D New SKM600GA124D Low Loss IGBT Module;600A/1200V/1U SKM600GA124D, SKM600GA124D pictures, SKM600GA124D price, #SKM600GA124D supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/skm600ga124d.html ------------------------------------------------------------------- SKM600GA124D Description Features • N Channel, enhancement mode • Short internal connections avoid oscillations • With built-in gate resistor chips (“R”) Rgtotal = 1,3 Ω • Without hard mould (environmental aspects) • Isolated copper baseplate using DCB Direct Copper Bonding Ceramic • All electrical connections on top for easy busbaring • Large clearance (10 mm) and creepage d...
Post a Comment
Read more

IXYS DSS2X160-01A

# DSS2X160-01A IXYS DSS2X160-01A New Rectifier Diode Schottky 1 Phase 2 Element 160A 100V V(RRM) Silicon MINI BLOC SOT-227 2 PIN, DSS2X160-01A pictures, DSS2X160-01A price, #DSS2X160-01A supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/dss2x160-01a.html ------------------------------------------------------------------- Manufacturer Part Number: DSS2X160-01A Pbfree Code: Yes Part Life Cycle Code: Active Ihs Manufacturer: IXYS CORP Part Package Code: SOT-227 Package Description: R-XUFM-N2 Pin Count: 4 ECCN Code: EAR99 HTS Code: 8541.10.00.80 Manufacturer: IXYS Corporation Additional Feature: FREE WHEELING DIODE Application: GENERAL PURPOSE Case Connection: CATHODE Configuration: COMMON CATHODE, 2 ELEMENTS Diode Element Material: SILICON Diode Type: ...
Post a Comment
Read more