Skip to main content

What are the reasons for the failure of metal parts?

The basic forms of failure of metal parts. Generally, the failure forms of mechanical parts are classified according to the external morphological characteristics of the failed parts, which generally include: wear failure, fracture failure, corrosion failure and distortion failure. In production practice, the most important failure mode is The wear failure of the working surface of the part, and the most dangerous form of failure is the instantaneous crack and fracture, collectively referred to as fracture failure.

​Basic forms of failure of metal cnc machining parts Generally, the failure modes of mechanical parts are classified according to the external morphological characteristics of the failed parts, which generally include: wear failure, fracture failure, corrosion failure and distortion failure. In production practice, the most important failure mode It is the wear failure of the working surface of the part, and the most dangerous form of failure is instantaneous cracks and fractures, collectively referred to as fracture failure.


1. Wear failure of parts

Friction and wear are a common phenomenon in nature. When parts or parts and other substances come into contact with each other and produce relative motion, it is called friction. The phenomenon of material loss on the friction surface of the part is called the wear of the china cnc machining part. Material wear includes two aspects: one is the damage of the material structure; the other is the change of size, shape and surface quality (roughness). If the wear of the parts exceeds a certain limit, it will lose its specified functions, causing the equipment to decline or fail to work. This situation is called wear failure. According to tribological theory, edm machining parts wear can be divided into abrasive wear, adhesive wear, fretting wear, erosion wear and corrosion wear according to their properties.

  • ① Abrasive wear: The phenomenon that the surface of parts and abrasives rub against each other, which causes the loss of surface material is called abrasive wear or abrasive wear. Abrasives also include hard asperities on the surface of the part. Among wear failures, abrasive wear failure is the most common and most harmful one.
  • ② Adhesive wear: Adhesive wear refers to the wear caused by two relatively sliding surfaces that are welded together locally, so that the material on one surface is transferred to the other surface.
  • ③Fatigue wear: When the two contact surfaces of the friction pair are relatively rolling or sliding, the periodic load will subject the contact area to a large alternating contact stress, causing fatigue cracks on the metal surface and continuous expansion, causing the surface material to fall off, causing points Corrosion and peeling, this phenomenon is called surface fatigue wear.
  • ④ Fretting wear: Fretting wear is the surface damage caused by relatively small vibration on two fixed contact surfaces, which mainly occurs on the joint surface of relatively static parts. The main hazard is to reduce the accuracy of the fit and loosen the tightly-fitted body. What is more serious is to cause stress concentration and cause fatigue fracture of the parts.
  • ⑤ Erosion wear: Erosion wear refers to the loss of the surface when the material is impacted by fixed particles, droplets or liquid bubbles.

2. Fracture failure of parts

The phenomenon of mechanical cnc manufacturing parts split into two or more pieces under the action of certain factors is called fracture. The new surface formed after the fracture of the part is called fracture.

  • ① Overload fracture: When the applied load exceeds the ultimate stress that its dangerous section can bear, the part will fracture. This kind of fracture is called overload fracture. Unreasonable strength design of parts, excessive stress on the structure, operation errors, overloaded operation of mechanical equipment, and excessive load on certain parts may lead to overload fracture.
  • ②Fatigue fracture: The fracture phenomenon of metal parts after a certain number of cyclic loads or alternating stresses is called fatigue fracture, also known as mechanical fatigue.
  • ③Brittle fracture: due to improper manufacturing process of metal parts, or corrosion by harmful media during use, or uncomfortable ambient temperature, the material may become brittle and the metal parts may suddenly fracture. Fractures of this nature are generally called brittle fractures, but also called environmental fractures.

Comments

Post a Comment

Popular posts from this blog

Machining and welding process notes for TC4 titanium alloy parts

Common welding methods for titanium and titanium alloys are as follows: Argon arc welding, submerged arc welding, vacuum electron beam welding, etc. Tungsten argon arc welding is used for thicknesses of 3 mm or less, and argon arc welding is done for 3 mm or more. The purity of argon is over 99.99%, and the content of air and water vapor in argon is strictly controlled. Currently, for TC4 titanium alloys, argon arc welding, plasma arc welding are often used for welding, but both methods need to be filled with welding material. Limitations on shield gas, purity and effectiveness increase the oxygen content of the joint, reduce its strength and increase its post-weld deformation. Electron beam welding and laser beam welding are used. The following is a description of precision welding and precautions for TC4 titanium alloy. 1. Weld hole problem Table of Contents 1. Weld hole problem 2, internal quality of welded part 3. Weld depth and its variation 4, j...
Post a Comment
Read more

Introduction to the correct choice of lubricating oil in summer

In the summer heat, not only the human body will have various adverse reactions, but also the car. Today, I will share with you one of the things you need to pay attention to in summer-lubricants. The role of lubricating oil The heat generated by the friction between the various moving bearing surfaces of the engine is second only to the heat when the engine cylinder is burned, and the lubricating oil takes the heat away by pressure lubrication, thus ensuring the normal operation of the friction surface. The heated lubricating oil returns to the oil pan through the oil passage for cooling. In terms of the structure of the engine, the oil pan is located under the engine*, and it is exposed to the air. It is generally made of materials with good thermal conductivity, and the lubricating oil is air-cooled through it. The cooled lubricating oil is sent to the lubricated surface again. The viscosity of the lubricating oil is very important for protecting the en...
Post a Comment
Read more
The production process of KOVAR parts processing has a great relationship with the process, including the process environment elements and the optimization configuration elements of the process route. The process route process needs to be formulated by an experienced person. The following is a brief explanation of the process process. The formulation of the process route process: First, the geometric structure of the parts, the core parts of the accuracy index, the accuracy requirements, material characteristics, heat treatment requirements and performance requirements, etc. should be carefully analyzed, and then the blanks of the parts should be reasonably selected, the cnc machining china equipment should be used reasonably, and reasonable measures should be taken. Many process links such as stress process measures are reasonably configured. In the production organization process, the process is strictly implemented. During the process, strict inspection is performed. For general p...
Post a Comment
Read more