Skip to main content

Six points of experience in precision metal parts processing

In the precision  machining of metal parts, hardware processing accounts for a large part. This time I will share with you what are the technological properties of hardware, I hope it will be helpful to everyone!

Casting performance: refers to some process properties of whether a metal or alloy is suitable for casting, including flow properties, ability to fill the mold; shrinkage, the ability to shrink the volume when the investment casting solidifies; segregation refers to the unevenness of chemical composition.

Welding performance: refers to the characteristics of metal materials that can meet the purpose of use by welding two or more metal materials together by heating or heating and pressure welding.



Top gas section performance: refers to the performance that laser cutting materials can bear upsetting without breaking.

Cold bending performance: refers to the performance of metal materials that can withstand bending without breaking at room temperature. The degree of bending is generally expressed by the ratio of the bending angle α (external angle) or the bending center diameter d to the material thickness a. The larger a or the smaller d/a, the better the cold bendability of the material.

Stamping performance: the ability of metal materials to withstand stamping deformation without breaking. Stamping at room temperature is called cold stamping. The inspection method is tested by cupping test.

Forging performance: the ability of metal materials to withstand plastic mold deformation without breaking during forging.

Processing is divided into the following four stages:

1.Face before hole

For parts such as box body, bracket and connecting rod, the plane should be processed first and then the hole should be processed. In this way, the holes can be positioned on the plane to ensure the accuracy of the plane and the position of the hole, and the processing of the holes on the plane is convenient.

2. Process the datum surface first

During the processing of the part, the surface as the positioning reference should be processed first in order to provide a precise reference for the subsequent processing as soon as possible. Called "benchmark first."

3. Finishing

The finishing cnc machining  china of the main surface (such as grinding, honing, fine grinding/rolling processing, etc.) should be carried out at the latter stage of the process route. The surface finish after processing is above Ra0.9um. A slight collision will damage the surface. In Japan , Germany and other countries, after the finishing process, they must be protected with flannel. Never touch the workpiece directly with your hands or other objects, so as to avoid the finishing surface from being damaged due to the transfer and installation between processes.

4, divide the processing stage

Surfaces with high processing quality requirements are divided into processing stages, which can generally be divided into three stages: rough processing, semi-finishing and finishing. The main purpose is to ensure the processing quality; facilitate the rational use of equipment; facilitate the arrangement of the heat treatment process; and facilitate the discovery of blank defects.

Comments

Post a Comment

Popular posts from this blog

Machining and welding process notes for TC4 titanium alloy parts

Common welding methods for titanium and titanium alloys are as follows: Argon arc welding, submerged arc welding, vacuum electron beam welding, etc. Tungsten argon arc welding is used for thicknesses of 3 mm or less, and argon arc welding is done for 3 mm or more. The purity of argon is over 99.99%, and the content of air and water vapor in argon is strictly controlled. Currently, for TC4 titanium alloys, argon arc welding, plasma arc welding are often used for welding, but both methods need to be filled with welding material. Limitations on shield gas, purity and effectiveness increase the oxygen content of the joint, reduce its strength and increase its post-weld deformation. Electron beam welding and laser beam welding are used. The following is a description of precision welding and precautions for TC4 titanium alloy. 1. Weld hole problem Table of Contents 1. Weld hole problem 2, internal quality of welded part 3. Weld depth and its variation 4, j...
Post a Comment
Read more

Introduction to the correct choice of lubricating oil in summer

In the summer heat, not only the human body will have various adverse reactions, but also the car. Today, I will share with you one of the things you need to pay attention to in summer-lubricants. The role of lubricating oil The heat generated by the friction between the various moving bearing surfaces of the engine is second only to the heat when the engine cylinder is burned, and the lubricating oil takes the heat away by pressure lubrication, thus ensuring the normal operation of the friction surface. The heated lubricating oil returns to the oil pan through the oil passage for cooling. In terms of the structure of the engine, the oil pan is located under the engine*, and it is exposed to the air. It is generally made of materials with good thermal conductivity, and the lubricating oil is air-cooled through it. The cooled lubricating oil is sent to the lubricated surface again. The viscosity of the lubricating oil is very important for protecting the en...
Post a Comment
Read more
The production process of KOVAR parts processing has a great relationship with the process, including the process environment elements and the optimization configuration elements of the process route. The process route process needs to be formulated by an experienced person. The following is a brief explanation of the process process. The formulation of the process route process: First, the geometric structure of the parts, the core parts of the accuracy index, the accuracy requirements, material characteristics, heat treatment requirements and performance requirements, etc. should be carefully analyzed, and then the blanks of the parts should be reasonably selected, the cnc machining china equipment should be used reasonably, and reasonable measures should be taken. Many process links such as stress process measures are reasonably configured. In the production organization process, the process is strictly implemented. During the process, strict inspection is performed. For general p...
Post a Comment
Read more