Skip to main content

Common sense of CNC lathe processing

Repetitive production of parts processed by CNC lathes: the use of CNC grinders accounts for a relatively high proportion of process preparation man-hours, such as process analysis preparation, programming, part adjustment and test cutting, etc. The sum of these comprehensive man-hours is often a single part The processing time is dozens to hundreds of times, but the work content of these CNC turning can be saved and used repeatedly. Therefore, when a part is successfully trial-produced on the CNC grinder and then repeatedly put into production, the production cycle is greatly reduced, the cost is less, and more can be obtained. Good economic benefits.



It is required to focus on ensuring the quality of the key parts in small and medium batches that can be produced efficiently: CNC grinding machines can achieve high-precision, high-quality, and high-efficiency grinding machining under computer control. Compared with the special grinding machine, it can save a lot of special process equipment, has a strong flexible manufacturing capacity and obtains better economic benefits. Compared with ordinary grinders, it can eliminate many man-made interference factors in the long process flow of complex machining, and the accuracy of machining parts is good, the interchangeability is good, and the machining efficiency is high.

The parts processed by the CNC lathe should meet the technological characteristics of the multi-process centralized processing of the CNC grinder or 3d printing. When the CNC grinder processes the parts, the grinding wheel cuts the workpiece and the corresponding non-nc grinder is exactly the same, but it can perform some processing accuracy requirements For example, in terms of grinding range, ordinary grinders are mainly used to grind cylindrical surfaces, circular CNC lathe cones or the end faces of stepped shoulders. In addition, CNC cylindrical grinders can also grind circles. Torus, as well as the above complex combined surfaces in various forms.

　　 The processing batch of parts should be larger than that of ordinary lathes and batches of CNC lathes. When processing small and medium batches of parts on non-CNC grinders, due to various reasons, the pure cutting time only accounts for 10%-30% of the actual working hours. When china cnc turning on a multi-process centralized CNC grinding machine such as a grinding machining center, this ratio may rise to 70% to 80%, but the preparation time for adjustment is often much longer, so the part batch will become too small. Uneconomical.

Considerations for the processing of some special cnc machining parts processed by CNC lathes. Although some parts are processed in small batches, ordinary lathes have complex shapes, high quality and good interchangeability. This cannot meet the above requirements on non-CNC grinders and can only be arranged. Processing on CNC grinders, such as parabola, cycloid cams and special-shaped mirrors.

Comments

Post a Comment

Popular posts from this blog

What are the characteristics of the CNC turning process?

What are the characteristics of the CNC turning process? Turning is a method of cutting the workpiece on the lathe by rotating the workpiece relative to the tool. Turning is the most basic and common cutting processing method. Most workpieces with revolving surfaces can be processed by turning methods, such as inner and outer cylindrical surfaces, inner and outer conical surfaces, end surfaces, grooves, threads, and rotary forming surfaces. Common lathes can be divided into horizontal lathes, floor lathes, vertical lathes, turret lathes and profiling lathes, and most of them are horizontal lathes.
1 comment
Read more

The Influence of CNC Turning and Milling Machining on Turning Efficiency

The cutting efficiency of CNC lathes will be affected by human factors, environmental factors and the machine tool itself. Let's talk about the influence of cutting amount and cutting tools on CNC lathe processing among many factors.   Reasonable cutting amount can improve the efficiency of CNC lathe. When the   laser  cutting  speed is increased by 10 times and the feed rate is increased by 20 times, far beyond the traditional cutting forbidden zone, the cutting mechanism has undergone a fundamental change.   The result of CNC turning  and milling combined processing is: the metal removal rate per unit power is increased by 30% to 40%, the cutting force is reduced by 30%, the cutting life of the tool is increased by 70%, and the cutting left on the workpiece is greatly reduced. Heat, cutting vibration almost disappeared; cutting processing has taken an essential leap. According to the current situation of CNC lathes, increase the feed per tooth, improve pr...
1 comment
Read more

Machining and welding process notes for TC4 titanium alloy parts

Common welding methods for titanium and titanium alloys are as follows: Argon arc welding, submerged arc welding, vacuum electron beam welding, etc. Tungsten argon arc welding is used for thicknesses of 3 mm or less, and argon arc welding is done for 3 mm or more. The purity of argon is over 99.99%, and the content of air and water vapor in argon is strictly controlled. Currently, for TC4 titanium alloys, argon arc welding, plasma arc welding are often used for welding, but both methods need to be filled with welding material. Limitations on shield gas, purity and effectiveness increase the oxygen content of the joint, reduce its strength and increase its post-weld deformation. Electron beam welding and laser beam welding are used. The following is a description of precision welding and precautions for TC4 titanium alloy. 1. Weld hole problem Table of Contents 1. Weld hole problem 2, internal quality of welded part 3. Weld depth and its variation 4, j...
Post a Comment
Read more